Difference between revisions of "Frequency Counter"

From Land Boards Wiki
Jump to navigation Jump to search
Line 42: Line 42:
 
=== Cuts/Jumpers ===
 
=== Cuts/Jumpers ===
  
* Front side cuts - blue
+
* Four cuts - blue
 
* Jumpers Red
 
* Jumpers Red
  

Revision as of 12:41, 3 October 2020

FreqXounter-Kit-Assembled-02.PNG

Features

Case

  • P-Touch white on black labels

FreqCounterLabels.jpg

  • Inexpensive plastic case
    • Plastic Waterproof Cover Electronic Project Instrument Enclosure DIY Box Case Junction Box Housing 100 x 60 x 25 mm Black
  • BNC connector - female chassis mount
  • 5.1mm Chassis mount power connector
    • 7-9V in

Rework - Add Pre-Amp

  • Re-uses extra HF transistor that would have been used by crystal tester oscillator
  • AC coupled input
  • Based on

Pre-Amp schematic

FreqCounter PreAmp Schematic.PNG

When building kit, do not install

FreqCounter DoNotInstallParts.PNG

Cuts/Jumpers

  • Four cuts - blue
  • Jumpers Red

FreqCounter Rework PCB Front.PNG

  • Back side cuts

FreqCounter Rework PCB Back.png

FreqCounter Rework-Cuts-Back.PNG

  • Details of preamp input pin

FreqCounter Rework-06.PNG

  • With parts

FreqCounter Rework-07.PNG

Testing

FreqCounter InCase.jpg

  • 4.9152 MHz crystal
  • Scope frequency counter shows 4.19520 MHz
  • Freq Counter displays 4.9747 MHz
  • Difference = 500 Hz or 0.1% accuracy
  • Can only adjust the variable capacitor in narrow range

Reviews / Builds