NanoVNA

From Land Boards Wiki
Jump to navigation Jump to search

NanoVNA - Network Analyzer

715RBejXZJL-Half.jpg

SPECS

  • Number of Calibration Points: 101 (Fixed)
  • Number of Scanning Points: 101 (Fixed)
  • Display Tracking: 4, Marking: 4, Save Setting : 5
  • PCB: 54mm x 85.5mm x 11mm (without the size of connectors, switches)
  • Measurement Frequency: 50KHz ~ 300MHz (50KHz -900MHz, enable extended firmware)
  • RF Output: -13dbm (maximum -9dbm)
  • Frequency Accuracy: 0.5ppm
  • Measurement Range: 70dB (50kHz-300MHz), 50dB (300M-600MHz), 40dB (600M-900MHz) enable extended firmware)
  • Port SWR: 1.1
  • Display: 2.8 inch TFT (320 x240)
  • USB Interface: USB Type-C; Communications Mode: CDC (Serial)
  • Power Supply: USB 5V 120mA, built-in 400mAh electricity, maximum charging current 0.8A
  • nanovna users nanovna-users@groups.io
  • Amazon links

Adding a battery

YouTube Videos