Difference between revisions of "OPTOUSB"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 6: | Line 6: | ||
* USB to TTL level Serial (FTDI) Interface | * USB to TTL level Serial (FTDI) Interface | ||
| − | * Genuine FTDI FT230XS part | + | ** Genuine FTDI FT230XS part |
| − | * Standard FTDI drivers | + | ** Standard FTDI drivers |
* Buffered lines on the TTL level side | * Buffered lines on the TTL level side | ||
| − | * Schmidt Trigger | + | ** Schmidt Trigger |
| − | * Voltage level hysteresis | + | *** Voltage level hysteresis |
| − | * Improved slew rate | + | *** Improved slew rate |
* OptoIsolated Connections | * OptoIsolated Connections | ||
| − | * Transmit, Receive, RTS, CTS | + | ** Transmit, Receive, RTS, CTS |
| − | * Configured for High Speed Serial | + | ** Configured for High Speed Serial |
* The Host USB connection is independent of the state of the FTDI side of the interface | * The Host USB connection is independent of the state of the FTDI side of the interface | ||
| − | * Host side can communicate with the USB host whether or not the target is even powered up | + | ** Host side can communicate with the USB host whether or not the target is even powered up |
| − | * Target power on/off doesn't cause a USB disconnect - handy for debug | + | ** Target power on/off doesn't cause a USB disconnect - handy for debug |
* Fast operation | * Fast operation | ||
* 3.3V or 5V FTDI voltage (order option) | * 3.3V or 5V FTDI voltage (order option) | ||
* Transmit/Receive LED Connectors | * Transmit/Receive LED Connectors | ||
| − | * On-board LED resistors | + | ** On-board LED resistors |
| − | * 49x49mm card | + | ** 49x49mm card |
| − | * (4) #4 Mounting Holes | + | ** (4) #4 Mounting Holes |
== Assembly Sheet == | == Assembly Sheet == | ||
* [[OPTOUSB Assembly Sheet]] | * [[OPTOUSB Assembly Sheet]] | ||
Revision as of 12:39, 10 January 2020
Features
- USB to TTL level Serial (FTDI) Interface
- Genuine FTDI FT230XS part
- Standard FTDI drivers
- Buffered lines on the TTL level side
- Schmidt Trigger
- Voltage level hysteresis
- Improved slew rate
- Schmidt Trigger
- OptoIsolated Connections
- Transmit, Receive, RTS, CTS
- Configured for High Speed Serial
- The Host USB connection is independent of the state of the FTDI side of the interface
- Host side can communicate with the USB host whether or not the target is even powered up
- Target power on/off doesn't cause a USB disconnect - handy for debug
- Fast operation
- 3.3V or 5V FTDI voltage (order option)
- Transmit/Receive LED Connectors
- On-board LED resistors
- 49x49mm card
- (4) #4 Mounting Holes
