OPTOUSB
Revision as of 19:58, 29 December 2019 by Blwikiadmin (talk | contribs) (Created page with "== Features == * USB to TTL level Serial (FTDI) Interface * Genuine FTDI FT230XS part * Standard FTDI drivers * Buffered lines on the TTL level side * Schmidt Trigger * Volta...")
Features
- USB to TTL level Serial (FTDI) Interface
- Genuine FTDI FT230XS part
- Standard FTDI drivers
- Buffered lines on the TTL level side
- Schmidt Trigger
- Voltage level hysteresis
- Improved slew rate
- OptoIsolated Connections
- Transmit, Receive, RTS, CTS
- Configured for High Speed Serial
- The Host USB connection is independent of the state of the FTDI side of the interface
- Host side can communicate with the USB host whether or not the target is even powered up
- Target power on/off doesn't cause a USB disconnect - handy for debug
- Fast operation
- 3.3V or 5V FTDI voltage (order option)
- Transmit/Receive LED Connectors
- On-board LED resistors
- 49x49mm card
- (4) #4 Mounting Holes
