Difference between revisions of "PDP-8 Front Panel Assembly Sheet"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) (→Notes) |
||
Line 46: | Line 46: | ||
== Notes == | == Notes == | ||
− | # Select LED color. I used [https://www.ebay.com/itm/123897764301?var=425000887144 orange clear LEDS] but [https://www.ebay.com/itm/381087033256 orange diffused body LEDs] | + | # Select LED color. I used [https://www.ebay.com/itm/123897764301?var=425000887144 orange clear LEDS] but [https://www.ebay.com/itm/381087033256 orange diffused body LEDs] are better since clear LEDs reflect background light. |
# LED ballast resistor. I used 1K because modern LEDs are really efficient and can get uncomfortably bright with higher current. Vcc is 3.3V, Orange LED drops ~1.8V. Leaves 1.4V across resistor. Equals 1.4 mA with 1K resistor. | # LED ballast resistor. I used 1K because modern LEDs are really efficient and can get uncomfortably bright with higher current. Vcc is 3.3V, Orange LED drops ~1.8V. Leaves 1.4V across resistor. Equals 1.4 mA with 1K resistor. | ||
# Pick whatever height button you like. I used 9mm tall which is pretty tall but it's what I had sitting around. | # Pick whatever height button you like. I used 9mm tall which is pretty tall but it's what I had sitting around. |
Latest revision as of 13:30, 25 May 2022
Parts List
Qty | Value | RefDes | Qty | Value | RefDes | |
---|---|---|---|---|---|---|
19 | LED, 5mm, Orange
(Note 1) |
D1-D19 | 1 | Header, Rt Angle, 0.1", 2x25 | J1 | |
19 | Res, 1K, 1/4W
(Note 2) |
R1-R19 | 7 | Switch, Pushbutton, 6mm
(Note 3) |
SW10-SW16 | |
21 | Res, 10K, 1/4W | R20-R41 | 14 | Slide Switch, SS12D00G3
(ebay) (amazon) (NOTE 4) |
SW1-SW9,SW17-SW21 |
Notes
- Select LED color. I used orange clear LEDS but orange diffused body LEDs are better since clear LEDs reflect background light.
- LED ballast resistor. I used 1K because modern LEDs are really efficient and can get uncomfortably bright with higher current. Vcc is 3.3V, Orange LED drops ~1.8V. Leaves 1.4V across resistor. Equals 1.4 mA with 1K resistor.
- Pick whatever height button you like. I used 9mm tall which is pretty tall but it's what I had sitting around.
- 0.1" pins. Select either SS12D00G3 3 pin slide switch or 3 pin headers.