PE4302 RF Attenuator
Revision as of 11:21, 29 July 2021 by Blwikiadmin (talk | contribs)
Features
- This is a PE4302 numerical control RF attenuator module.
- The parallel immediate mode is simple and easy to use.
- Bandwidth is wide and can be 1MHz to 4GHz.
- Program control gain attenuation range is from 0 to 31.5DB.
- The module supports parallel port and serial port mode as well as power on state selection function.
Specifications
- Power Supply Voltage: 5V DC (typical current 5mA)
- Program control gain attenuation range: 0~31.5DB
- Stepping: 0.5DB
- Input/Output Impedance: 50ohm
- Bandwidth: 1MHz~4GHz(Attenuation value will differ under different frequency)
- Connector: SMA-female
