Difference between revisions of "VFO-004"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 12: | Line 12: | ||
* [http://www.qrp-labs.com/synth Si5351 qrp-labs Breakout board] | * [http://www.qrp-labs.com/synth Si5351 qrp-labs Breakout board] | ||
** [http://www.qrp-labs.com/images/synth/synth_assembly4.pdf Assembly instructions] | ** [http://www.qrp-labs.com/images/synth/synth_assembly4.pdf Assembly instructions] | ||
| − | * ''' | + | * '''Replaced R1, R2 with 3.3K''' |
[[File:Si5351_Breakout_Schematic.PNG]] | [[File:Si5351_Breakout_Schematic.PNG]] | ||
Revision as of 11:05, 29 October 2020
Contents
Breadboard VFO
- Si5351 qrp-labs Breakout board
- Arduino Mini
- Rotary Encoder Breakout Board
Parts
Si5351 Board
- Si5351 qrp-labs Breakout board
- Replaced R1, R2 with 3.3K
Rotary Encoder/Breakout Board
- Includes pushbutton Switch
- Includes Pull-Up resistors
- Needs R/C filter on output for debounce
- Reading Rotary Encoders - Arduino reference
- Simple Rotary Encoder Arduino library
- Library for the Arduino environment for using a rotary encoder as an input
128x32 OLED
Arduino Library for OLED =
U8G2_SSD1306_128X32_UNIVISION_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // STM32, Ebay OLED
u8g2.setFont(u8g2_font_ncenB14_tr);
Hello World Code
U8G2_SSD1306_128X32_UNIVISION_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // STM32, Ebay OLED
void setup(void) {
u8g2.begin();
}
void loop(void) {
u8g2.clearBuffer(); // clear the internal memory
u8g2.setFont(u8g2_font_ncenB08_tr); // choose a suitable font
u8g2.drawStr(0,10,"Hello World!"); // write something to the internal memory
u8g2.sendBuffer(); // transfer internal memory to the display
delay(1000);
}
