Difference between revisions of "VFO-001"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 31: | Line 31: | ||
[[File:VFO-001-SCHEMATIC-V2A.PNG]] | [[File:VFO-001-SCHEMATIC-V2A.PNG]] | ||
− | * PWR - connect only when no Mini-360 Buck Regulator is uded | + | * PWR* - connect only when no Mini-360 Buck Regulator is uded |
== Build == | == Build == |
Revision as of 15:02, 31 October 2020
Contents
Features
- SDD1306 OLED Display
- I2C Interface
- OLED runs from 3.3V (can run from 5V but this use has 3.3V)
- Rotary Encoder Break Out Board
- Arduino Pro Mini
- Arduino compatible
- 3.3V
- 8 MHz
- Programmed via Arduino IDE
- Download via serial
- Si5351 Oscillator Breakout Board
- 10 KHz - 40 MHz tuning range
- 1Hz/10Hz/100Hz/1KHz/10KHz/100KHz/1MHz/10MHz steps
- I2C Interface
- 3 Outputs
- 27 MHz crystal
- 3.3V operation works without level shifters for I2C*
- Si5351 can only run from 3.3V
- Used right angle headers and Dupont cables for low profile
- 10 KHz - 40 MHz tuning range
- Extruded Aluminum Enclosure Box - 94mm x 83mm x 30mm - Out of stock
- Mini-360 Buck Regulator
- 5V-23V input
- 3.3V output
Schematic
- PWR* - connect only when no Mini-360 Buck Regulator is uded
Build
- Extruded Aluminum Enclosure Box - 94mm x 83mm x 30mm - Out of stock
- BNC/Power Jack placement
- Rear panel BNCs and power jack
- Drill holes and nibble out for OLED cutout
- A bit rough
- Better to undercut nibble and file to size
- OLED fitted
- Final
Libraries/Example Code
Land Boards Code
Libraries used in this app
- U8g2: Library for monochrome displays, version 2
- Si5351 Library for Arduino
- Rotary Encoder - Software debounced
Other Si5351 Libraries
- Universal Digital VFO Si570/Si5351
- Adafruit_Si5351
- Si5351 Library for avr-gcc
- vk3hn_VFO_controller
- Simple BFO with si5351 controlled by Arduino
- VFO and BFO with Si5351A, OLED and Arduino
Videos