Difference between revisions of "PiPicoMite01 Rev2 Assembly Sheet"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (Created page with "file:PicoMite01_Rev2_CAD.PNG == Parts List == {| class="wikitable" ! Find ! Qty ! Ref Des ! Part Number ! ! Find ! Qty ! Ref Des ! Part Number |- | 1 | 4 | C1, C2, C6,...") |
Blwikiadmin (talk | contribs) |
||
| (36 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[File:tindie-mediums.png|link=https://www.tindie.com/products/26931/]] | ||
| + | |||
| + | * '''Make sure you build with the current revision assembly sheet''' | ||
| + | ** Revision is marked on the rear of the card | ||
| + | * If the board is Rev 1, use [[PiPicoMite01 Rev1 Assembly Sheet]] | ||
| + | |||
| + | [[file:PiPicoMite01_Rev2_P18315-720px.jpg]] | ||
| + | |||
[[file:PicoMite01_Rev2_CAD.PNG]] | [[file:PicoMite01_Rev2_CAD.PNG]] | ||
== Parts List == | == Parts List == | ||
| + | |||
| + | * [http://land-boards.com/PiPicoMite01/PiPicoMite01_ibom_Rev2.html PiPicoMite01 Rev2 Interactive BOM] | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 22: | Line 32: | ||
| 1 | | 1 | ||
| U2 | | U2 | ||
| − | | Socket. 28-pin, 0.3in | + | | Socket. 28-pin, 0.3in [https://www.mouser.com/ProductDetail/575-199328 Mouser quality part] |
|- | |- | ||
| 2 | | 2 | ||
| Line 47: | Line 57: | ||
| 1 | | 1 | ||
| D1 | | D1 | ||
| − | | [https://www.digikey.com/en/products/detail/panjit-international-inc/1N5819-R2-00001/15796595 1N5819] | + | | [https://www.digikey.com/en/products/detail/panjit-international-inc/1N5819-R2-00001/15796595 1N5819] [https://www.mouser.com/c/semiconductors/discrete-semiconductors/diodes-rectifiers/schottky-diodes-rectifiers/?q=1N5819&package%20%2F%20case=DO-41&instock=y Mouser] |
| | | | ||
| 18 | | 18 | ||
| Line 56: | Line 66: | ||
| 5 | | 5 | ||
| 1 | | 1 | ||
| − | | D2 | + | | D2 (alt for D1) |
| [https://www.mouser.com/ProductDetail/863-MBR0530T1G MBR0520T1H] | | [https://www.mouser.com/ProductDetail/863-MBR0530T1G MBR0520T1H] | ||
| | | | ||
| Line 92: | Line 102: | ||
| 1 | | 1 | ||
| J2 | | J2 | ||
| − | | [https://www.mouser.com/datasheet/2/123/English_634_Ordering_Guide-1830723.pdf CONN, DB15HD, BLUE (VGA)] | + | | [https://www.mouser.com/datasheet/2/123/English_634_Ordering_Guide-1830723.pdf CONN, DB15HD, BLUE (VGA)] [https://www.mouser.com/ProductDetail/587-634-015-274-906 Mouser] |
|- | |- | ||
| 9 | | 9 | ||
| Line 102: | Line 112: | ||
| 1 | | 1 | ||
| J7 | | J7 | ||
| − | | [https://www.mouser.com/datasheet/2/222/KMDGX-334716.pdf PS2_DIN6] | + | | [https://www.mouser.com/datasheet/2/222/KMDGX-334716.pdf PS2_DIN6] ([https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=ps%2F2+din+connector+purple&_sacat=0&LH_TitleDesc=0&_odkw=PS%2F2+DIN+connector&_osacat=0 ebay choices]) |
|- | |- | ||
| 10 | | 10 | ||
| Line 112: | Line 122: | ||
| 1 | | 1 | ||
| J4 | | J4 | ||
| − | | [https://www.mouser.com/datasheet/2/670/sj1_352xn-1779157.pdf AudioJack3] | + | | [https://www.mouser.com/datasheet/2/670/sj1_352xn-1779157.pdf AudioJack3] [https://www.mouser.com/ProductDetail/490-SJ1-3523N Mouser] |
|- | |- | ||
| 11 | | 11 | ||
| Line 122: | Line 132: | ||
| 1 | | 1 | ||
| J5 | | J5 | ||
| − | | [https://www.mouser.com/datasheet/2/670/uj2_bh_th-1779177.pdf USB-B] | + | | [https://www.mouser.com/datasheet/2/670/uj2_bh_th-1779177.pdf USB-B] [https://www.mouser.com/ProductDetail/490-UJ2-BH-1-TH Mouser] |
|- | |- | ||
| 12 | | 12 | ||
| Line 132: | Line 142: | ||
| 1 | | 1 | ||
| U1 | | U1 | ||
| − | | [https://www.adafruit.com/product/4864 | + | | Raspberry Pi Pico RP2040 |
| + | [https://www.digikey.com/en/products/detail/raspberry-pi/SC0915/13624793?s=N4IgjCBcoLQdIDGUBmBDANgZwKYBoQB7KAbXADYBOABhAF0BfBggJlJAAUBLAAm8WKMgA Digikey] | ||
| + | [https://www.adafruit.com/product/4864 Adafruit] | ||
| + | [https://www.mouser.com/ProductDetail/Raspberry-Pi/SC0915?qs=T%252BzbugeAwjgnLi4azxXVFA%3D%3D Mouser] | ||
|- | |- | ||
| 13 | | 13 | ||
| 1 | | 1 | ||
| U3 | | U3 | ||
| − | | [https://www.mouser.com/ProductDetail/ | + | | [https://www.mouser.com/ProductDetail/Texas-Instruments/TXS0104ED?qs=sGAEpiMZZMswyCOIqqEmexhRsemsJKDFoco1dTJTqzk%3D TXS0104ED] |
| | | | ||
| 27 | | 27 | ||
| 1 | | 1 | ||
| U2 | | U2 | ||
| − | | [https://www.mouser.com/datasheet/2/268/20001952C-1129816.pdf MCP23017_SP] | + | | [https://www.mouser.com/datasheet/2/268/20001952C-1129816.pdf MCP23017_SP] [https://www.adafruit.com/product/732 Adafruit] |
|- | |- | ||
| 14 | | 14 | ||
| 1 | | 1 | ||
| SD1 | | SD1 | ||
| − | | [https://cdn.amphenol-cs.com/media/wysiwyg/files/drawing/gmc02008xhr.pdf Conn, SD Card] | + | | [https://cdn.amphenol-cs.com/media/wysiwyg/files/drawing/gmc02008xhr.pdf Conn, SD Card] [https://www.mouser.com/ProductDetail/Amphenol-Commercial-Products/GMC020080HR?qs=W0yvOO0ixfGUck2%252BUqFamw%3D%3D Mouser] |
| | | | ||
| | | | ||
| Line 155: | Line 168: | ||
|- | |- | ||
|} | |} | ||
| + | |||
| + | == Notes == | ||
| + | |||
| + | # Install either D1 or D2 | ||
| + | # Can use 1N400x in place of Schottky diode at D1/D2 location | ||
| + | # DC can be provided via header pins on J6 so J5 (USB B power connector) can be omitted | ||
| + | # U2 socket is optional | ||
| + | # Install shunts at H1, H2 as required per [[PiPicoMite01|wiki page]] | ||
| + | # Resistor pads fit either 1/8W or 1/4W parts (1/4W shown here) | ||
| + | |||
| + | [[file:Res_8th_Qrtr_W_P18205.JPG]] | ||
Latest revision as of 19:27, 28 May 2023
- Make sure you build with the current revision assembly sheet
- Revision is marked on the rear of the card
- If the board is Rev 1, use PiPicoMite01 Rev1 Assembly Sheet
Parts List
| Find | Qty | Ref Des | Part Number | Find | Qty | Ref Des | Part Number | |
|---|---|---|---|---|---|---|---|---|
| 1 | 4 | C1, C2, C6, C8 | 0.1uF | 15 | 1 | U2 | Socket. 28-pin, 0.3in Mouser quality part | |
| 2 | 2 | C3, C5 | 47uF | 16 | 1 | H1 | Header, Vert, 2x2 | |
| 3 | 2 | C4, C7 | 47nF | 17 | 1 | H2 | Header, Vert, 1x2 | |
| 4 | 1 | D1 | 1N5819 Mouser | 18 | 1 | J1 | Header, Vert, 2x10 | |
| 5 | 1 | D2 (alt for D1) | MBR0520T1H | 19 | 1 | J3 | Header, Vert, 2x8 | |
| 6 | 6 | R1, R2, R10, R11, R13, R14 | 2.2K | 20 | 1 | J6 | Header, Vert, 2x3 | |
| 7 | 2 | R3, R4 | 270 | 21 | 1 | J8 | Header, Rt Angle, 1x4 | |
| 8 | 1 | R5 | 390 | 22 | 1 | J2 | CONN, DB15HD, BLUE (VGA) Mouser | |
| 9 | 2 | R6, R8 | 47 | 23 | 1 | J7 | PS2_DIN6 (ebay choices) | |
| 10 | 1 | R7 | 820 | 24 | 1 | J4 | AudioJack3 Mouser | |
| 11 | 2 | R9, R12 | 1K | 25 | 1 | J5 | USB-B Mouser | |
| 12 | 2 | R15, R16 | 10K | 26 | 1 | U1 | Raspberry Pi Pico RP2040
Digikey Adafruit Mouser | |
| 13 | 1 | U3 | TXS0104ED | 27 | 1 | U2 | MCP23017_SP Adafruit | |
| 14 | 1 | SD1 | Conn, SD Card Mouser |
Notes
- Install either D1 or D2
- Can use 1N400x in place of Schottky diode at D1/D2 location
- DC can be provided via header pins on J6 so J5 (USB B power connector) can be omitted
- U2 socket is optional
- Install shunts at H1, H2 as required per wiki page
- Resistor pads fit either 1/8W or 1/4W parts (1/4W shown here)
