PiPicoMite01 Rev2 Assembly Sheet
Jump to navigation
Jump to search
- Make sure you build with the current revision assembly sheet
- Revision is marked on the rear of the card
- If the board is Rev 1, use PiPicoMite01 Rev1 Assembly Sheet
Parts List
| Find | Qty | Ref Des | Part Number | Find | Qty | Ref Des | Part Number | |
|---|---|---|---|---|---|---|---|---|
| 1 | 4 | C1, C2, C6, C8 | 0.1uF | 15 | 1 | U2 | Socket. 28-pin, 0.3in Mouser quality part | |
| 2 | 2 | C3, C5 | 47uF | 16 | 1 | H1 | Header, Vert, 2x2 | |
| 3 | 2 | C4, C7 | 47nF | 17 | 1 | H2 | Header, Vert, 1x2 | |
| 4 | 1 | D1 | 1N5819 Mouser | 18 | 1 | J1 | Header, Vert, 2x10 | |
| 5 | 1 | D2 (alt for D1) | MBR0520T1H | 19 | 1 | J3 | Header, Vert, 2x8 | |
| 6 | 6 | R1, R2, R10, R11, R13, R14 | 2.2K | 20 | 1 | J6 | Header, Vert, 2x3 | |
| 7 | 2 | R3, R4 | 270 | 21 | 1 | J8 | Header, Rt Angle, 1x4 | |
| 8 | 1 | R5 | 390 | 22 | 1 | J2 | CONN, DB15HD, BLUE (VGA) Mouser | |
| 9 | 2 | R6, R8 | 47 | 23 | 1 | J7 | PS2_DIN6 (ebay choices) | |
| 10 | 1 | R7 | 820 | 24 | 1 | J4 | AudioJack3 Mouser | |
| 11 | 2 | R9, R12 | 1K | 25 | 1 | J5 | USB-B Mouser | |
| 12 | 2 | R15, R16 | 10K | 26 | 1 | U1 | Raspberry Pi Pico RP2040
Digikey Adafruit Mouser | |
| 13 | 1 | U3 | TXS0104ED | 27 | 1 | U2 | MCP23017_SP Adafruit | |
| 14 | 1 | SD1 | Conn, SD Card Mouser |
Notes
- Install either D1 or D2
- Can use 1N400x in place of Schottky diode at D1/D2 location
- DC can be provided via header pins on J6 so J5 (USB B power connector) can be omitted
- U2 socket is optional
- Install shunts at H1, H2 as required per wiki page
- Resistor pads fit either 1/8W or 1/4W parts (1/4W shown here)
