Difference between revisions of "DIGIO-128"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 47: | Line 47: | ||
[[File:P1-DIGIO-Conn.PNG]] | [[File:P1-DIGIO-Conn.PNG]] | ||
− | === I2C Connectors == | + | === I2C Connectors === |
[[File:J2-J3-I2C-conn-X2.PNG]] | [[File:J2-J3-I2C-conn-X2.PNG]] |
Revision as of 18:28, 29 December 2019
Contents
DIGIO-128 Card
Features
- (8) of MCP23017 - 16 bit GPIO x 8
- Total of 128 bits of GPIO
- I2C host interface
- MCP23017] I2C Parallel I/O
- Two Wire interface
- 100/400 KHZ operation
- 25mA sink/source capability per I/O
- Jumper selectable terminators
- Single 4-pin host interface connector (Ground, Power, Clock, Data)
- 0.1" Pitch I/O Connectors
- 16 digital I/O
- 2 Power
- 2 Ground
- Interrupt connectors
- I2C Connector
- Power Connector
- 24LC024 Personality EEPROM
- 3.3V or 5V operation
- Compatible with Arduino, Raspberry Pi, BeagleBone Black
- 95x95mm form factor
- (4) 6-32 mounting holes - one on each corner
I2C Addresses
- MCP23017 parts 0x20 - 0x27
- EEPROM 24LC024 = 0x50
Software Examples/Drivers
- DIGIO-128 Arduino example code
- DIGIO-128 Arduino Driver
- DIGIO-128 - 64-bit version Arduino Driver
- DIGIO-128 Micropython Driver (ESP-32)