Difference between revisions of "DCE"

From Land Boards Wiki
Jump to navigation Jump to search
Line 63: Line 63:
  
 
* The [[DTE]] (PC) has the male connector
 
* The [[DTE]] (PC) has the male connector
 +
* [[RS-232 Breakout Card]]
  
 
== DCE Assembly Sheet ==
 
== DCE Assembly Sheet ==
  
 
* [[DCE Assembly Sheet]]
 
* [[DCE Assembly Sheet]]

Revision as of 14:19, 19 August 2022

Tindie-mediums.png

DCE Assembly Rev2 P560 720px.jpg

Features

  • TTL to RS-232 converter
    • Tx/RX/RTS/CTS
  • Female DB-9 connector
  • FTDI pinout (reversed directions to directly connect to FTDI Interface)
  • Up to 115,200 baud @ 5V
  • Up to 250,000 baud @ 3.3V
  • 49x49mm card
  • 4x 4-40 holes

DCE - RS-232 to TTL

  • The DCE (peripheral) has the female DB-9 connector

DTE DCE.png

  • The DTE (PC) has the male DB-9 connector

H1 Connector

  • Pins signal directions are reversed from an FTDI card
    • Can be directly wired to FTDI connector

Pinout

  1. GND
  2. CTS (out)
  3. VCC (3.3V or 5V)
  4. TX (in)
  5. Rx (out)
  6. RTS (in)

Test Procedure

DCE DTE Test P554 720px.jpg

  • FTDI-49MM
    • 3.3V/5V jumper set to 5V
    • Power cable from FTDI-49MM 5V Connector split to both DCE/DTE cards
  • DCE/DTE Cards
    • 9 pin connectors plugged together
  • FTDI loopback cable
    • TX/RX connected
    • RTSCTS connected
  • USB B cable to PC
  • Run PuTTY
    • 115,200 baud, RTS/CTS
  • Type and it comes back

SP232A Application

SP232A app.PNG

DTE (reference)

DCE Assembly Sheet