Difference between revisions of "Front Panel V2 Assembly Sheet Rev 1"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) (→Notes) |
||
| Line 57: | Line 57: | ||
* Note 2 - 1K ballast LED resistors. Pick value for how bright you want LEDs at operating voltage. | * Note 2 - 1K ballast LED resistors. Pick value for how bright you want LEDs at operating voltage. | ||
* Note 3 - LEDs - I like [https://www.ebay.com/itm/381087033256 diffused Orange LEDs]. I don't like clear LEDs. | * Note 3 - LEDs - I like [https://www.ebay.com/itm/381087033256 diffused Orange LEDs]. I don't like clear LEDs. | ||
| + | * Note 4 - Pick the height you like. I like [https://www.ebay.com/itm/402850517873 6mm high]. | ||
Revision as of 15:40, 20 June 2021
Parts List
| Qty | Value | RefDes | Qty | Value | RefDes | |
|---|---|---|---|---|---|---|
| 4 | 10K, 1/4W | R3-R7 | 32 | LED, 5MM (NOTE 3) | DS1-DS32 | |
| 2 | 2.2K, 1/4W (NOTE 1) | R1,R2 | 1 | HEADER, RT ANG, 2X2 | J6 | |
| 32 | 1K, 1/4W (NOTE 2) | R5,R8-R38 | 1 | HEADER, RT ANG 1X4 | J3 | |
| 4 | MCP23017-E/SP - DIP | U1-U4 | 1 | HEADER, RT ANG, 1x2 | J1 | |
| 32 | SW_Push | SW1-SW32 | 1 | HEADER, RT ANG, 1x5 | J2 |
Notes
- Note 1 - R1 and R2 are 2.2K I2C terminators. Needed for 3.3V operation and 400 KHz operation.
- Note 2 - 1K ballast LED resistors. Pick value for how bright you want LEDs at operating voltage.
- Note 3 - LEDs - I like diffused Orange LEDs. I don't like clear LEDs.
- Note 4 - Pick the height you like. I like 6mm high.
