Difference between revisions of "SSB6 Assembly Sheet"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 17: | Line 17: | ||
| | | | ||
| 2 | | 2 | ||
| − | | BNC, Rt angle | + | | BNC, Rt angle (Note 1) |
| J1,J2 | | J1,J2 | ||
|- | |- | ||
| Line 25: | Line 25: | ||
| | | | ||
| 2 | | 2 | ||
| − | | SMA, Edge launch | + | | SMA, Edge launch (Note 1) |
| P1,P2 | | P1,P2 | ||
|- | |- | ||
| Line 41: | Line 41: | ||
| | | | ||
| 6 | | 6 | ||
| − | | [https://www.mouser.com/ProductDetail/449-LFXTAL064523BULK 9 MHz crystal] | + | | [https://www.mouser.com/ProductDetail/449-LFXTAL064523BULK 9 MHz crystal] (Note 2) |
| Y1-Y6 | | Y1-Y6 | ||
|- | |- | ||
| Line 54: | Line 54: | ||
|} | |} | ||
| − | + | # Install either BNC or SMA | |
| + | # Match crystals within 250 Hz (easy when you start with 50 crystals | ||
== Parts List - 2000 Hz == | == Parts List - 2000 Hz == | ||
Revision as of 11:37, 15 October 2021
Contents
Parts List - 2500 Hz
| Qty | Value | RefDes | Qty | Value | RefDes | |
|---|---|---|---|---|---|---|
| 2 | 10pF | C1,C11 | 2 | BNC, Rt angle (Note 1) | J1,J2 | |
| 2 | 120pF | C2,C10 | 2 | SMA, Edge launch (Note 1) | P1,P2 | |
| 2 | 82pF | C3,C9 | 2 | Toroid, FT37-43 | T1,T2 | |
| 3 | 100pF | C4,C6,C8 | 6 | 9 MHz crystal (Note 2) | Y1-Y6 | |
| 2 | 470pF | C5,C7 |
- Install either BNC or SMA
- Match crystals within 250 Hz (easy when you start with 50 crystals
Parts List - 2000 Hz
| Qty | Value | RefDes | Qty | Value | RefDes | |
|---|---|---|---|---|---|---|
| 2 | 47pF | C1,C11 | 2 | BNC, Rt angle | J1,J2 | |
| 2 | 360pF | C2,C10 | 2 | SMA, Edge launch | P1,P2 | |
| 2 | 100pF | C3,C9 | 2 | Toroid, FT37-43 | T1,T2 | |
| 3 | 133pF | C4,C6,C8 | 6 | 9 MHz crystal | Y1-Y6 | |
| 2 | 400pF | C5,C7 |
- Match crystals within 250 Hz (easy when you start with 50 crystals
Transformer
- T1, T2 are 10 bifilar 28 AWG turns on FT37-43 toroid
In Transformer Footprint
Out Transformer Footprint
