Main Page

From blwiki
Jump to: navigation, search

Tindie-larges-v2.png

Arduino Compatible

All of our Arduino compatible boards have solid mounting holes and can be mounted in enclosures for real world applications.

Arduino Tinys

Our family of Arduino compatibles uses the 8-pin ATTiny85 for a compact and inexpensive solution.

  • TinyDuino85 - ATTiny85 board
  • TinyGrid85 - ATTiny85 board with generous breadboard area for quick prototyping
  • Tiny85ISP - ATTiny85 ISP based Programmer board

Audio

These boards include audio building blocks and larger functions.

Beaglebone Capes

Add 5V I/O to the BeagleBone Black.

  • BBB-GVS - 5V GVS Beaglebone cape
  • BBB-GVS-3 - GVS Beaglebone cape, Analog buffering
  • BBB-COMMS-2 - Beaglebone cape with Communications and I/O

Digital to Analog

There are plenty of digital pots out there but few that let you run the wipers to voltages higher than 5V.

Edison cards

GVS Sensors

We like sensors with GVS pinouts. They go well with our Arduino Compatible boards (GVSDuino, GVS-32U4, or TinyDuino85)

  • DS18S20 - One Wire Temperature Sensor
  • DS18S20-LDR - One Wire Temperature Sensor plus Light Dependent Resistor (LDR) Sensor
  • GVS-Switch - Switch
  • IR_Sensor - Infrared Sensor
  • IRSens-2 - Infrared Sensor v2
  • LDRSensor - Light Dependent Resistor (LDR)Sensor
  • Sw5Way - A 5 way switch on a single analog input line
  • Sw5-2 - A discrete 5 way switch on a single analog input line
  • NewPot - Potentiometer
  • NewPot2 - Potentiometer
  • GVSUNI - Universal GVS Sensor card

Ham Radio

I/O Cards

  • I2C8Bit - MCP23008 based small form factor card
  • I2C16Bit - MCP23017 based small form factor card
  • One Wire Logger - Much more than just a sensor, it's a complete datalogger with display
  • MyMenu - 5 way switch plus OLED for a standalone menu system
  • OptoSmall - 4 Channel Opto-Isolator card
  • OptoFast - 4 Channel Opto-Isolator card with speed enhancement
  • OptoFastBi - 4 Channel (Two in each direction) Opto-Isolator card
  • OPTOFAST-2 - 4 Channel Opto-Isolator card with even better speed enhancement
  • I2C-RPT - 4-channel I2C Repeater
  • I2C-RPT-08 - 8-channel I2C Repeater
  • I2C-TEMP - I2C Temperature sensor
  • SPI-POTX2 - I2C Dual potentiometer
  • I2CIO-8 - I2C Digital I/O test/demo card
  • I2CIO-8X - I2C Digital I/O test/demo card
  • SIG-CON-01 - Signal Conditioner card
  • ESP-BKOUT - ESP8266 ESP-01 breakout card
  • ESP-12E-01 - ESP8266 ESP-12E breakout card
  • DisplayProc-01 - Display Processor
  • SIOProc-01 - Serial I/O Processor
  • EP2C5-DB - Grant Searle's Multi-Computer Daughtercard
  • BASE-EP4CE6 - Cyclone IV FPGA Baseboard

Open Data Acquisition System (ODAS)

Open Data Acquisition System

Documentation Function # I/O In/Out Opto Isolated Connector
OptoIn8-I2C Eight Channel Optically Isolated Input Card 8 In Yes DB-25
OptoOut8-I2C Eight Channel Optically Isolated Output Card 8 Out Yes DB-25
DigIO16-I2C 16 Channel Digital I/O Card with I2C bus 16 I/O No DB-25
DIGIO-128 128 Channel Digital I/O Card with I2C bus 128 I/O No 0.1" Headers
DAS-32U4 Arduino compatible Processor Card 20+ I/O No GVS
DIGIO32-I2C 32-Bit Digio Card with DB-37 connector 32 I/O No DB-37
PROTO16-I2C 16-Bit Digio Card with open logic area and DB-25 connector 16 I/O No DB-25
ODAS-PSOC5 PSOC 5LP on ODAS hardware 30+ I/O No 0.1", 2x20
OPSOC-95MM-01 PSOC 5LP on ODAS hardware 30+ I/O No 0.1", DB62
CARRIER95TO49MM Card Carrier/Adapter N/A I/O No 0.1"
ODAS-RELAY-16 16 Channel Relay Card N/A I/O No 0.1"
BASE-EP4CE6 FPGA Board N/A I/O No 0.1"
BLUE-PILL-HUB STM32 CPU Board N/A I/O No 0.1"

Lights

  • CCLED - Constant Current 1W LED card
  • LED1W - 1W LED card
  • LED1W4X - 4X 1W LED card
  • LED-TEST-2 - Test outputs with a card that has 16 LEDs on it
  • LED-Test - Test outputs with a card that has 16 LEDs on it
  • LED-18 - A board with 18 white LEDs and Microprocessor control
  • LED-12 - A board with 12 LEDs controlled by a 555 Timer
  • LED-32 - A board with 32 LEDs and a common ground

Other Sensors

GPS

Power Cards

  • BrBdPwrSply - Breadboard Power Supply
  • PowerDistrib - Power Distribution card
  • POWER-49MM - Power Distribution card
  • PwrSply317 - Adjustable Power Supply - a true classic
  • PWR-BLK-01 - USB to TTL Serial plus LiPo charger plus 5V Switching Mode Power Supply
  • PWR-BLK-02 - USB to TTL Serial plus LiPo charger plus 5V Switching Mode Power Supply
  • PWR-BLK-03 - USB LiPo charger plus 5V Switching Mode Power Supply
  • USB-POWER - USB 5V Switching Mode Power Supply

Prototyping

All of our boards are excellent for prototyping, but these are especially designed for that purpose.

Raspberry Pi Boards

Documentation Function 3.3V GPIO 5V GPIO Compatible with
RasPi-GVS GVS card 0 16 All Raspberry Pi Models
RPP-UIO-16 GVS card 3.3V/5V 26 0-16 Raspberry Pi Models A+, B+, Pi 2
RASPI-PLUS-GVS GVS card 5V 9 16 Raspberry Pi Models A+, B+, Pi 2
RASPI-PLUS-GVS-CFG Configurable GVS hat 26 0-8 Raspberry Pi Models A+, B+, Pi 2
RPIO-TINY GVS card 17 0 All Raspberry Pi Models
RPIO-TINY-2 GVS card 17 0-8 All Raspberry Pi Models
RPIO-TINY-3 GVS card 17 0 All Raspberry Pi Models
RPI-MDI Servo card 3 0 All Raspberry Pi Models
RPI-CONSOLE Console extender card (Mini USB) N/A N/A All Raspberry Pi Models
RPI-CONSOLE-U Console extender card (Micro USB) N/A N/A All Raspberry Pi Models
RPI-I2C-HUB I2C Hub/repeater/level translator card N/A N/A All Raspberry Pi Models
RPPSOC Programmable System On a Chip N/A N/A Raspberry Pi Models A+, B+, Pi 2, Pi 3
RPI-PWR Raspberry Pi Recessed Power Card N/A N/A All Raspberry Pi Models
PIATX Raspberry Pi <> ATX Case Connections N/A N/A All Raspberry Pi Models
PC-Case-USB ATX Case USB Connections N/A N/A All Raspberry Pi Models

Test Equipment

Ancillary

X10