Difference between revisions of "ArduinoInABox"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 12: | Line 12: | ||
** A six pin header can be connected to an FTDI cable provide USB power and communication to the board | ** A six pin header can be connected to an FTDI cable provide USB power and communication to the board | ||
** 3.3 or 5V | ** 3.3 or 5V | ||
| − | ** 8 MHz or 16 MHz | + | ** 8 MHz (3.3V or 16 MHz (5V) |
** Programmable in Arduino IDE | ** Programmable in Arduino IDE | ||
* Detachable Human Interface design (HID) | * Detachable Human Interface design (HID) | ||
Revision as of 19:17, 17 October 2021
Features
- Arduino Pro Mini
- Inexpensive and widely available
- I/O
- 14 digital input/output pins (of which 6 can be used as PWM outputs)
- 6 analog inputs
- On-board resonator
- Reset button
- A six pin header can be connected to an FTDI cable provide USB power and communication to the board
- 3.3 or 5V
- 8 MHz (3.3V or 16 MHz (5V)
- Programmable in Arduino IDE
- Detachable Human Interface design (HID)
- OLED
- 128x32 or 128x64
- u8x8 driver - 6.2KB overhead
- Rotary Encoder with switch
- Can leave attached until installing in box
- OLED
- Input power
- Wide input voltage range
- 5-23V (for 3.3V Arduino Pro Mini)
- 7-23V (for 5V Arduino Pro Mini)
- 2.1mm DC Power Connector Jack
- RF filters on OLED and into HID board
- Mini360 Switching Mode Power Supply
- About $1
- Wide input voltage range
- I/O Boards
- Arduino pins brought to 2x13 header
- P2-P13, A0-A3
- A4/A5 or SDA/SCL
- Easily designed
- 3 BNC or SMA connectors
- Brought to headers
- DB25 pass-through
- Arduino pins brought to 2x13 header
- Mounts in a standard box
I/O Card
- Connectors are placed on 0.1" grid
- 26 pin, 3 BNC/SMA connectors
DB-25 Example
- Standard DB-25 female
- Similar to (but narrower and female)
Mechanicals/Enclosure
- Board is designed to fit into Aluminum Project Box Enclosure DIY 100*76*35mm - ebay search
- VFO-003 - Similar in a box
