Difference between revisions of "A Termination Insensitive Amplifier for Bidirectional Transceivers"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 4: | Line 4: | ||
* [http://w7zoi.net/bidirectional_matched_amplifier.pdf A Termination Insensitive Amplifier for Bidirectional Transceivers] - W7ZOI design | * [http://w7zoi.net/bidirectional_matched_amplifier.pdf A Termination Insensitive Amplifier for Bidirectional Transceivers] - W7ZOI design | ||
| + | ** Input impedance that does not depend upon the output load | ||
** Bi-directional - amplifiers in both directions | ** Bi-directional - amplifiers in both directions | ||
** 50 ohms in/out | ** 50 ohms in/out | ||
Revision as of 19:14, 29 October 2021
W7ZOI Design
- A Termination Insensitive Amplifier for Bidirectional Transceivers - W7ZOI design
- Input impedance that does not depend upon the output load
- Bi-directional - amplifiers in both directions
- 50 ohms in/out
- BNC or SMA Connectors
- Transformer-less
- Power applied to one half at a time - determines signal flow direction
Schematic in KiCAD
- Single channel
- With SPICE directives
- Both channels
- With SPICE directives
NGSPICE Simulation
- NGSPICE run from KiCAD
- +24 dB @12V
- Closely matches
- Across Band
CAD
