Difference between revisions of "RF-Amp"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 31: | Line 31: | ||
[[file:FT37-43_10_Turns.PNG]] | [[file:FT37-43_10_Turns.PNG]] | ||
| + | |||
| + | ==== Tracks ==== | ||
| + | |||
| + | [[file:RF-Amp-tracks.PNG]] | ||
==== Input Transformer ==== | ==== Input Transformer ==== | ||
| Line 37: | Line 41: | ||
*** 50:75.8 Ohms = 1 : 1.23 turns ratio | *** 50:75.8 Ohms = 1 : 1.23 turns ratio | ||
**** 9 turns primary, 11 turns on secondary | **** 9 turns primary, 11 turns on secondary | ||
| + | |||
| + | [[file:RF-Amp-T2.PNG]] | ||
==== Output Transformer ==== | ==== Output Transformer ==== | ||
| Line 43: | Line 49: | ||
*** 200:50 Ohms = 2:1 turns ratio | *** 200:50 Ohms = 2:1 turns ratio | ||
*** 10 turns primary (on transistor collector), 5 turns secondary (towards output) | *** 10 turns primary (on transistor collector), 5 turns secondary (towards output) | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
[[file:RF-Amp-T1.PNG]] | [[file:RF-Amp-T1.PNG]] | ||
Revision as of 10:23, 4 November 2021
Contents
RF Amplifier Features
- From Charlie Morris' (ZL2CTM) Go QRP Portable SSB Rig
- Solid State Design for the Radio Amateur?
- +22 dB gain
- Input connectors: SMA or BNC
- 49x49mm card
- 4x 4-40 mounting holes
RF Amplifier Design
Schematic
DC Operating Point
- Ice = 10 mA
- Ve = 0.1 * Vcc = 1.2V
Input/Output Transformer
FT37-43 Toroid
- FT37-43
- Wideband Transformers 5 - 400 MHz
- Power Transformers 0.5 - 30 MHz
- 10 turns = 35uH
Tracks
Input Transformer
- Input Transformer (T1 on Charlie's - T2 on this board)
- 50:75.8 Ohms = 1 : 1.23 turns ratio
- 9 turns primary, 11 turns on secondary
- 50:75.8 Ohms = 1 : 1.23 turns ratio
- Input Transformer (T1 on Charlie's - T2 on this board)
Output Transformer
- Output transformer (T2 on Charlie's - T1 on this board)
- 200:50 Ohms = 2:1 turns ratio
- 10 turns primary (on transistor collector), 5 turns secondary (towards output)
- Output transformer (T2 on Charlie's - T1 on this board)
LT Spice Simulation
Transformer 1.5 uH
Transformer 35 uH
Charlie Morris Schematics
IF AMP
Video
