Difference between revisions of "Extend IOP16 minimal example"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 9: | Line 9: | ||
* Requires two GitHub repositories | * Requires two GitHub repositories | ||
** Clone to same directory level since relative paths are used for source files | ** Clone to same directory level since relative paths are used for source files | ||
| − | ** [https://github.com/douggilliland/IOP16 IOP16 | + | *** [https://github.com/douggilliland/IOP16 IOP16 GitHub repository] |
| − | ** [https://github.com/douggilliland/Design_A_CPU Design a CPU | + | *** [https://github.com/douggilliland/Design_A_CPU Design a CPU GitHub repository] |
== Steps == | == Steps == | ||
Revision as of 10:36, 11 April 2022
Contents
Overview
- This is a guide to extending the minimal IOP example by adding IOP16 Peripherals to the minimal design
- This is not the same as Embedding the IOP16 into another design
- This guide requires general familiarity with IOP16 16-bit I/O CPU Design
Sources
- Requires two GitHub repositories
- Clone to same directory level since relative paths are used for source files
Steps
- Copy baseline design
- Select/add peripherals
- Create new peripherals
- Write assembly code
Baseline Design
- Starts from IOP example
- Similar to Arduino "Blink Sketch" and uses the resources
- Timer Unit 0 1 second timer
- On-board LED
- The Timer unit could be removed if desired
- Timer makes Blink easier
- Similar to Arduino "Blink Sketch" and uses the resources
- Copy the minimal design to a new folder
