Difference between revisions of "QTPy49"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 108: | Line 108: | ||
# 3.3V | # 3.3V | ||
# AD0 | # AD0 | ||
+ | |||
+ | == Prototype == | ||
+ | |||
+ | * Built on [[GRID49]] card | ||
+ | |||
+ | [[file:QTPy_Proto_P18238-720px.jpg]] | ||
== Mechanicals == | == Mechanicals == | ||
[[file:QTPy49_MECHS.PNG]] | [[file:QTPy49_MECHS.PNG]] | ||
− | |||
== Assembly Sheet == | == Assembly Sheet == | ||
* [[QTPy49 Rev 1 Assembly Sheet]] | * [[QTPy49 Rev 1 Assembly Sheet]] |
Revision as of 14:05, 7 June 2022
Contents
Features
- CPU choices are
- Socketed CPU
- Headers
- DC Power
- AD0-AD3 GVS
- I2C
- TX/RX
- SPi
- Power input
- 7-12V
- 5V
- 49x49mm ODAS form factor
- (4) 4-40 mounting holes
Connectors
- Ground, Voltage, Signal (GVS) connections
J1 - DC In
- 7-12V
- Center positive
J2 - Short Regulator
- Install if J1 has 5V
- No need to install U2 regulator
J3 - SPI
- GND
- 3.3V
- SS, AD3
- MOSI, S10
- MISO, D9
- SCK, D8
J4 - UART
- GND
- 3.3V
- TX, D6
- RX, D7
J5 - I2C
- GND
- 3.3V
- D4, SDA
- D5, SCL
J6 - AD3
- Digital I/O 3
- Analog In 3
- PWM output
- Capacitive touch input
- Pinout
- GND
- 3.3V
- AD3
J7 - AD2
- Digital I/O 2
- Analog In 2
- PWM
- Capacitive touch input
- Pinout
- GND
- 3.3V
- AD2
J8 - AD1
- Digital I/O 1
- Analog In 1
- Capacitive touch input
- AREF pin
- Pinout
- GND
- 3.3V
- AD1
J9 - AD0
- Digital I/O 0
- Analog In 0
- True analog output with 10 bit precision
- Does not have PWM
- Capacitive touch input
- Pinout
- GND
- 3.3V
- AD0
Prototype
- Built on GRID49 card