Difference between revisions of "DRIVE50 Assembly Sheet"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) (→Notes) |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | [[file: | + | [[file:DRIVE50_CAD_F-B_REV1.png]] |
== Parts List == | == Parts List == | ||
| Line 27: | Line 27: | ||
| 1 | | 1 | ||
| R1 | | R1 | ||
| − | | 1K (0805) | + | | 1K (0805) (option) |
| | | | ||
| 8 | | 8 | ||
| 1 | | 1 | ||
| PB1 | | PB1 | ||
| − | | BNC, | + | | BNC, [https://www.mouser.com/ProductDetail/Amphenol-RF/031-5431-10RFX?qs=py4qCovljJ8doXL0muNs1w%3D%3D 031-5431-10RFX] (or) |
|- | |- | ||
| 3 | | 3 | ||
| Line 57: | Line 57: | ||
| 1 | | 1 | ||
| U1 | | U1 | ||
| − | | [ | + | | [https://www.mouser.com/ProductDetail/Texas-Instruments/SN74AC14DR?qs=IF4wzcbwb3q8zFpUsjYipA%3D%3D 74AC14] |
| | | | ||
| | | | ||
| Line 67: | Line 67: | ||
| 1 | | 1 | ||
| DS1 | | DS1 | ||
| − | | LED (0805) | + | | LED (0805) (option) |
| | | | ||
| | | | ||
| Line 82: | Line 82: | ||
** 75 Ohms out = 374 Ohm resistor | ** 75 Ohms out = 374 Ohm resistor | ||
* SMA or BNC output connector | * SMA or BNC output connector | ||
| + | * LED option | ||
Latest revision as of 16:16, 30 July 2022
Parts List
| Find | Qty | Ref Des | Part Number | Find | Qty | Ref Des | Part Number | |
|---|---|---|---|---|---|---|---|---|
| 1 | 1 | C1 | 0.1uF (0805) | 7 | 1 | J1 | Header, Right Angle, 1x3 | |
| 2 | 1 | R1 | 1K (0805) (option) | 8 | 1 | PB1 | BNC, 031-5431-10RFX (or) | |
| 3 | 5 | R2, R3, R4, R5, R6 | 249 (0805) or 374 (0805) | 9 | 1 | PA1 | SMA, Edge Launch | |
| 4 | 1 | R7 | 10K (0805) | |||||
| 5 | 1 | U1 | 74AC14 | |||||
| 6 | 1 | DS1 | LED (0805) (option) |
Notes
- Output Impedance
- 50 Ohms out = 249 Ohm resistor
- 75 Ohms out = 374 Ohm resistor
- SMA or BNC output connector
- LED option
