Difference between revisions of "SH-LEV-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) (→J1/J2) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 23: | Line 23: | ||
* 1x12 Low and High side connectors | * 1x12 Low and High side connectors | ||
| + | * Extra power/ground pins for drop to other optional cards | ||
== 3D == | == 3D == | ||
| Line 29: | Line 30: | ||
[[file:SH-LEV-01_REAR_3D.png]] | [[file:SH-LEV-01_REAR_3D.png]] | ||
| + | |||
| + | == Mechanicals == | ||
| + | |||
| + | [[file:SH-LEV-01_MECHS_Rev1.PNG]] | ||
== Assembly Sheet == | == Assembly Sheet == | ||
[[SH-LEV-01 Rev 1 Assembly Sheet]] | [[SH-LEV-01 Rev 1 Assembly Sheet]] | ||
Latest revision as of 11:54, 20 August 2022
Features
- 8-bit Bidirectional Level Shifter
- 2x TXS0104ED
- "High" voltage to "Low" voltage Bidirectional Level Shifter
- 1.65 V to 3.6 V on Low Voltage port
- 2.3 V to 5.5 V on High Voltage port (VCCA ≤ VCCB)
- Typical use as 3.3V to 5V level shifter
- No Direction-Control Signal Needed
- Max Data Rates
- 24 Mbps (Push Pull)
- 2 Mbps (Open Drain)
- 49x49mm card
- (4) 4-40 Mounting Holes
Connectors
J1/J2
- 1x12 Low and High side connectors
- Extra power/ground pins for drop to other optional cards
3D
Mechanicals
