Difference between revisions of "SYNTH-MIDI-CTL-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 13: | Line 13: | ||
** [https://www.mouser.com/ProductDetail/Microchip-Technology-Atmel/MCP4822-E-P?qs=sGAEpiMZZMtgJDuTUz7Xu5a0A%252BlHhkxt3QSpqvc4zyk%3D MCP4822 12-bit D/A] - SPI Interface | ** [https://www.mouser.com/ProductDetail/Microchip-Technology-Atmel/MCP4822-E-P?qs=sGAEpiMZZMtgJDuTUz7Xu5a0A%252BlHhkxt3QSpqvc4zyk%3D MCP4822 12-bit D/A] - SPI Interface | ||
** Use with [[SYNTH-VCO-01]] | ** Use with [[SYNTH-VCO-01]] | ||
| − | ** CV1 = V/OCT | + | *** CV1 = V/OCT |
| − | ** CV2 = MOD | + | *** CV2 = MOD |
* Digital Outs | * Digital Outs | ||
** Gate | ** Gate | ||
Revision as of 08:59, 23 September 2022
Features
- Adapted from HAGIWO's MIDI to CV module
- Translate from Japanese to English using browser
- Controller is XAIO RP2040
- Arduino MIDI library has not yet been ported to Pico so will need to use CircuitPython
- MIDI In
- Standard MIDI Jacks
- MIDI out jack for future functionality
- (2) 0-5V Analog CV outs
- MCP4822 12-bit D/A - SPI Interface
- Use with SYNTH-VCO-01
- CV1 = V/OCT
- CV2 = MOD
- Digital Outs
- Gate
- Clock
- Pot supports setting Clock rate
- Standard EuroRack 6 pin header
- Supports 12V in with on-board 5V regulator
- 5V regulator can be not installed if 5V is available on EuroRack connection
- Card is not a Eurorack card
- Probably too deep, needs cabling
Reference Docs
- elkayem midi2cv GitHub page _ Nano based project
- Arduino MIDI library has not yet been ported to Pico so will need to use Python
- Drives 4 CV outputs: Pitch Blend, Control, Note, Velocity
- This card only drives Note (Voltes/Oct, Mod)
- MIDI Controller in Python
- Principles of Voltage Control
- Creative Control Strategies: MIDI to CV
- EuroPi
- Eurorack Beginners Guide
- Eurorack Wiki page
- PicoPicoSynth
