Difference between revisions of "MIDI-IN-OUT"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 61: | Line 61: | ||
{| class="wikitable" | {| class="wikitable" | ||
| − | ! Vcc | + | ! Param |
| − | + | ! Val | |
| − | + | ! Unit | |
| + | |- | ||
| + | | Vcc | ||
| + | | 5 | ||
| + | | V | ||
|- | |- | ||
| Vf LED | | Vf LED | ||
| − | | 1. | + | | 1.2 |
| V | | V | ||
|- | |- | ||
| Res ser | | Res ser | ||
| − | | 660 | + | | 660 |
| Ohms | | Ohms | ||
|- | |- | ||
| Line 78: | Line 82: | ||
|- | |- | ||
| CTR (min) | | CTR (min) | ||
| − | | 0. | + | | 0.2 |
| A/A | | A/A | ||
|- | |- | ||
| Line 86: | Line 90: | ||
|- | |- | ||
| Vout | | Vout | ||
| − | | 3. | + | | 3.3 |
| V | | V | ||
|- | |- | ||
| Line 94: | Line 98: | ||
|- | |- | ||
| Vout | | Vout | ||
| − | | 5 | + | | 5 |
| V | | V | ||
|- | |- | ||
| Line 102: | Line 106: | ||
|- | |- | ||
|} | |} | ||
| − | |||
| − | |||
Revision as of 14:01, 29 September 2022
Contents
Features
- Module for Prototyping Synthesizer components
- MIDI In/Out Jacks
- Opto-isolated MIDI Input
- 5V MIDI interface
- 3.3V or 5V Serial connections
- MIDI In is opto-isolated
- (2) 4-40 Mounting holes
Connectors
J1 - MIDI In
- Opto-isolated input
J2 - MIDI Out
J3 - Serial/Power
- Pinout
- V1 (3.3V or 5V
- 5V
- Receive data (out of card)
- Transmit (in to card)
- GND
J4 - Short V1 to 5V
- Short J3-1 to J3-2
- Used when Host Serial interface is 5V
- Open when Host Serial interface is 3.3V
Drive Circuit
- 4N25 Optocoupler
- DC Current Transfer Ratio
- LED Current vs voltage
- Output transistor capacitance
- Switching Time
| Param | Val | Unit |
|---|---|---|
| Vcc | 5 | V |
| Vf LED | 1.2 | V |
| Res ser | 660 | Ohms |
| If LED | 5.76 | mA |
| CTR (min) | 0.2 | A/A |
| Iout | 1.15 | mA |
| Vout | 3.3 | V |
| R(min) | 2.86 | Kohms |
| Vout | 5 | V |
| R(min) | 1.75 | Kohms |
