Difference between revisions of "RPPSOC"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 33: | Line 33: | ||
* [https://github.com/land-boards/RPPSOC RPPSOC GitHub Repo] | * [https://github.com/land-boards/RPPSOC RPPSOC GitHub Repo] | ||
| + | ** [https://github.com/land-boards/RasPi/tree/master/RPPSOC/HSSP/HSSP_Programmer HSSP_Programmer] - Code that program PSoC from the Raspberry Pi | ||
| + | ** [https://github.com/land-boards/RasPi/tree/master/RPPSOC/eeprom EEPROM file] - Data in the On-Board EEPROM | ||
* [https://github.com/land-boards/RasPi/tree/master/RPPSOC RPPSOC GitHub Repo] | * [https://github.com/land-boards/RasPi/tree/master/RPPSOC RPPSOC GitHub Repo] | ||
* [https://github.com/land-boards/LB-RPPSOC LB-RPPSOC GitHub Repo] | * [https://github.com/land-boards/LB-RPPSOC LB-RPPSOC GitHub Repo] | ||
Revision as of 12:14, 4 October 2022
Raspberry Pi System-on-a-Chip
Features
- PSOC part CY8C5267AXI-LP051
- Core: ARM Cortex M3
- Data Bus Width: 32 bit
- Maximum Clock Frequency: 67 MHz
- Program Memory Size: 128 kB
- Data RAM Size: 32 kB
- ADC Resolution: 12 bit
- Data RAM Type: SRAM
- Interface Type: I2C, USB
- Number of ADC Channels: 1
- Number of I/Os: 72 I/O
- Number of Timers/Counters: 4 Timer
- Program Memory Type: Flash
- Works on all Raspberry Pi cards with 40 pin GPIO (A+/B+/Pi2/Pi3/Zero)
- All 29 Raspberry Pi I/O lines are connected to the PSOC
- 3 of the lines are used for programming the PSSoC
- Configuration EEPROM
- Fuses on 3.3V and 5V power
- Two I/O connectors
- 14 + 16 = 30 I/O pins
Drivers
- RPPSOC GitHub Repo
- HSSP_Programmer - Code that program PSoC from the Raspberry Pi
- EEPROM file - Data in the On-Board EEPROM
- RPPSOC GitHub Repo
- LB-RPPSOC GitHub Repo
