Difference between revisions of "SYNTH-MIDI-CTL-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 46: | Line 46: | ||
* D9 s/b 1N914 | * D9 s/b 1N914 | ||
* s/s R1 has 1K, P/L has 2.7K | * s/s R1 has 1K, P/L has 2.7K | ||
| + | * DIN-5 J4 could use a 0.1uF cap to logic ground | ||
== Assembly Sheet == | == Assembly Sheet == | ||
* [[SYNTH-MIDI-CTL-01 Rev 1 Assembly Sheet]] | * [[SYNTH-MIDI-CTL-01 Rev 1 Assembly Sheet]] | ||
Revision as of 15:43, 10 October 2022
Features
- Adapted from HAGIWO's MIDI to CV module
- Translate from Japanese to English using browser
- XAIO RP2040 CPU
- Arduino MIDI library has not yet been ported to Pico so will need to use CircuitPython MIDI Library
- MIDI In/Out
- Standard MIDI Jacks
- MIDI out jack for future functionality
- (2) 0-5V Analog CV outs
- MCP4822 12-bit D/A - SPI Interface
- Use with SYNTH-VCO-01
- CV1 = V/OCT
- CV2 = MOD
- (2) Digital Outs, eX:
- Gate
- Clock
- Pot supports setting Clock rate
- Standard EuroRack 16 pin header
- Supports 12V in with on-board 5V regulator
- 5V regulator can be not installed if 5V is available on EuroRack connection
- Card is not a Eurorack card
- Probably too deep, needs cabling
- (6) 6-32 Mounting holes
- Stacks with SYNTH-VCO-01 card
Videos
- Similar design
Software
- SYNTHMIDICTL01 - Arduino Software
Issues
Rev 1 Checkout
- D9 s/b 1N914
- s/s R1 has 1K, P/L has 2.7K
- DIN-5 J4 could use a 0.1uF cap to logic ground
