Difference between revisions of "ER-PROTO-01"

From Land Boards Wiki
Jump to navigation Jump to search
Line 31: Line 31:
  
 
* J1-J4 are front panel connectors
 
* J1-J4 are front panel connectors
* J6 on the I/O card
 
** Eurorack power
 
** 2x5 IDC
 
** GATE, CV not connected
 
  
 
[[file:ER-PROTO-DB-01_J6.png]]
 
[[file:ER-PROTO-DB-01_J6.png]]

Revision as of 20:23, 26 October 2022

ER-PROTO-PANEL-01-SET FRONT REAR-3D-720px.png

Features

  • Eurorack Prototyping card set
  • 6 HP wide (30mm) front panel
  • 3U tall
  • Three card set
    • Board interconnect headers duplicated on headers
    • 30mm wide front panel
    • 28mm wide panel and daughtercards
  • 6 POTS
    • Marked as RV1-RV5
    • Series resistors on pot wiper
    • All 3 pot pins brought to top header
  • 4 Jacks
    • Marked as J1-J4
    • Tip/sleeve brought to header near middle/bottom
  • Pots on top, jacks on bottom of card
    • Easier to adjust pots without bumping into pots
    • Pots more often accessed than jacks
  • Large prototyping area
    • 58 nodes with 3 holes per node (29 per "side")
  • +12V, -12V down board edges
  • 5V/GND down center of card
  • Bussed connections horizontally
  • Front Panel with generic labels
    • Cover with White on Black P-Touch labels

Connectors

  • J1-J4 are front panel connectors

ER-PROTO-DB-01 J6.png

Inter-card Connectors

  • J5 on the Controls card and J5 on the I/O card

ER-PROTO-CTLS-6-01 J5.PNG

  • J6 on the controls card and J37 on the I/O card

ER-PROTO-CTLS-6-01 J10.PNG

Daughtercard Connectors

Example

  • Arduino NANO with quad Opamp example

ER-PROTO-DB-01 ARDUINO NANO OPAMP-720px.png