Difference between revisions of "Beaks Through Hole Peaks"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 61: | Line 61: | ||
* Parts List has JLCPCB part numbers | * Parts List has JLCPCB part numbers | ||
* SW1, SW2 - [https://jlcpcb.com/partdetail/Usakro-UK_B0202_G14160/C620311 JLCPCB C620311] - Tactile Switch, 6mm, 14mm | * SW1, SW2 - [https://jlcpcb.com/partdetail/Usakro-UK_B0202_G14160/C620311 JLCPCB C620311] - Tactile Switch, 6mm, 14mm | ||
+ | ** [https://www.ebay.com/itm/223492387652?var=522247396254 Ordered on Ebay] | ||
* SW3, SW4 - [https://jlcpcb.com/partdetail/Diptronics-ML6H2T2RQA/C501573 JLCPCB C501573] - Illuminated switch (ordered along with PCB] | * SW3, SW4 - [https://jlcpcb.com/partdetail/Diptronics-ML6H2T2RQA/C501573 JLCPCB C501573] - Illuminated switch (ordered along with PCB] | ||
* LEDs have Green body when off, but light up in yellow when illuminated | * LEDs have Green body when off, but light up in yellow when illuminated | ||
+ | * Can use 100K pots? | ||
+ | ** The pots are used to set levels into the STM32 analog pins | ||
* Added cap ref des C3, C4, C7, C12 | * Added cap ref des C3, C4, C7, C12 | ||
Revision as of 13:33, 14 November 2022
Contents
Features
- Acts as
- ADSR
- LFO
- Tap LFO
- Drum
- 4 step Sequencer
- Trigger Delay
- Trigger Randomizer
- Drum Synth
- Buttons
- Manual Trigger
- Inputs
- (2) Trigger
- Outputs
- 2
- Knobs
- Parameters - mode dependent
- Mode controls knob function
- Split (2 knobs each)
- Twin
- Expert
Commercial Product
- 8 HP
- 25mm depth
- +12V@60 mA, -12V@2mA
Notes
- Get the PCB set with panel and both PCBs for 9$ at Kristian's Tindie store
- Tindie store
- (Or) Download the Gerber files - sound-force page
- 5pcs Red Common Cathode 7 segment display - MAKE SURE TO CHOOSE COMMON CATHODE
- Get a STM32 Programmer here
- The STM32F103C8T6 is the 64kb version and thus too small but SOMETIMES they are 128kb
- STM32F013CBT8 (128kb version) on ebay... not that many to choose from :/
- Front panel gerber by MyModularJourney
- Braids illustrated. all the waveforms explained
- Discord where you find the mi-th-braids channel and much more
- Gilet / Mutable Instruments Github for all her modules - SMT version
- Modular in a Week playlist
- Support Kristian's work on Patreon
- Kristian's Discord server - See mt-th-braids channel
Parts List Notes
- Parts List has JLCPCB part numbers
- SW1, SW2 - JLCPCB C620311 - Tactile Switch, 6mm, 14mm
- SW3, SW4 - JLCPCB C501573 - Illuminated switch (ordered along with PCB]
- LEDs have Green body when off, but light up in yellow when illuminated
- Can use 100K pots?
- The pots are used to set levels into the STM32 analog pins
- Added cap ref des C3, C4, C7, C12
- LEDs go Kathode down
Blue Pill
Videos