Difference between revisions of "ER-SH-02"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (→Test) |
Blwikiadmin (talk | contribs) (→Test) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 59: | Line 59: | ||
* SAM_CLK pulse | * SAM_CLK pulse | ||
| − | ** ~3.6 uS wide low | + | ** ~3.6 uS wide low (load pulse is actually active high) |
[[file:ER-LEVEL-SH_.SAM_CLK.png]] | [[file:ER-LEVEL-SH_.SAM_CLK.png]] | ||
| − | * Sample [[Noise_Generator_on_ER-PROTO-01]] | + | * Sample White Noise from [[Noise_Generator_on_ER-PROTO-01]] |
[[file:ER-S-H_WHITE_SAMPLE.png]] | [[file:ER-S-H_WHITE_SAMPLE.png]] | ||
| − | * Sample [[Noise_Generator_on_ER-PROTO-01]] | + | * Sample Pink Noise from [[Noise_Generator_on_ER-PROTO-01]] |
[[file:ER-S-H_PINK_SAMPLE.png]] | [[file:ER-S-H_PINK_SAMPLE.png]] | ||
| − | * Sample [[Noise_Generator_on_ER-PROTO-01]] | + | * Sample Blue Noise from [[Noise_Generator_on_ER-PROTO-01]] |
[[file:ER-S-H_BLUE_SAMPLE.png]] | [[file:ER-S-H_BLUE_SAMPLE.png]] | ||
Latest revision as of 22:49, 4 February 2023
Contents
Features
- 3U, 6HP Eurorack Module
- Dual Sample/Hold
- Internal/External Sample Clock
- Pot adjust sample rate
- Clock LED
- Built on ER-PROTO-02 card
- +/- 12V Eurorack power
Credits
Connectors
- J1 - Trigger In
- J3 - In 1
- J4 - Out 1
- J5 - In 2
- J6 - Out 2
Design
- Trigger Clock
- LED
- PIN 9 GOES TO POT CENTER/RESISOR
- LED - IS POT 2 WIPER VIA RESISTOR
- S/H
- Pots
- Jacks
+ +/-12V
- Eurorack Power
Test
- SAM_CLK pulse
- ~3.6 uS wide low (load pulse is actually active high)
- Sample White Noise from Noise_Generator_on_ER-PROTO-01
- Sample Pink Noise from Noise_Generator_on_ER-PROTO-01
- Sample Blue Noise from Noise_Generator_on_ER-PROTO-01
Build
