Difference between revisions of "DTE"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 13: | Line 13: | ||
# GND | # GND | ||
| − | # | + | # CTS (out) |
# VCC | # VCC | ||
| − | # | + | # RTS (in) |
| − | # | + | # RX (out) |
| − | # | + | # Tx (in) |
== H1 Connector (Rev 2) == | == H1 Connector (Rev 2) == | ||
Revision as of 20:24, 17 April 2020
Contents
DTE - RS-232 to TTL
- RS-232 to TTL converter
- The DTE (PC) has the male connector
- The DCE (peripheral) has the female.
H1 Connector (Rev 1)
- Signal referenced to H1 connector
- GND
- CTS (out)
- VCC
- RTS (in)
- RX (out)
- Tx (in)
H1 Connector (Rev 2)
- Signal referenced to H1 connector
- GND
- RTS (out)
- VCC
- RX (in)
- Tx (out)
- CTS (in)
SP232A Application
- SP232ACN-L is 5V part
- ICL3232IBNZ is 3.3V or 5V part
DCE (reference)
- The DCE (Terminal) has the female connector
