Difference between revisions of "NanoVNA"

Revision as of 17:35, 22 April 2020

Number of Calibration Points: 101 (Fixed)
Number of Scanning Points: 101 (Fixed)
Display Tracking: 4, Marking: 4, Save Setting : 5
PCB: 54mm x 85.5mm x 11mm (without the size of connectors, switches)
Measurement Frequency: 50KHz ~ 300MHz (50KHz -900MHz, enable extended firmware)
RF Output: -13dbm (maximum -9dbm)
Frequency Accuracy: 0.5ppm
Measurement Range: 70dB (50kHz-300MHz), 50dB (300M-600MHz), 40dB (600M-900MHz) enable extended firmware)
Port SWR: 1.1
Display: 2.8 inch TFT (320 x240)
USB Interface: USB Type-C; Communications Mode: CDC (Serial)
Power Supply: USB 5V 120mA, built-in 400mAh electricity, maximum charging current 0.8A
nanovna users nanovna-users@groups.io
Amazon links

@@ Line 1: / Line 1: @@
 == NanoVNA - Network Analyzer ==
-* The local frequency of NanoVNA is 50kHz to 300MHz.
+[[File:715RBejXZJL-Half.jpg]]
-[[File:715RBejXZJL-Half.jpg]]
+== SPECS ==
+* Number of Calibration Points: 101 (Fixed)
+* Number of Scanning Points: 101 (Fixed)
+* Display Tracking: 4, Marking: 4, Save Setting : 5
+* PCB: 54mm x 85.5mm x 11mm (without the size of connectors, switches)
+* Measurement Frequency: 50KHz ~ 300MHz (50KHz -900MHz, enable extended firmware)
+* RF Output: -13dbm (maximum -9dbm)
+* Frequency Accuracy: 0.5ppm
+* Measurement Range: 70dB (50kHz-300MHz), 50dB (300M-600MHz), 40dB (600M-900MHz) enable extended firmware)
+* Port SWR: 1.1
+* Display: 2.8 inch TFT (320 x240)
+* USB Interface: USB Type-C; Communications Mode: CDC (Serial)
+* Power Supply: USB 5V 120mA, built-in 400mAh electricity, maximum charging current 0.8A
+*
 * nanovna users nanovna-users@groups.io
 * [https://www.amazon.com/s?k=NanoVNA&ref=nb_sb_noss_2 Amazon links]