Difference between revisions of "STM32 Black Pill"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 33: | Line 33: | ||
* [https://stm32-base.org/boards/STM32F401CCU6-WeAct-Black-Pill-V1.2.html WeAct Black Pill V1.2] - Helpful page | * [https://stm32-base.org/boards/STM32F401CCU6-WeAct-Black-Pill-V1.2.html WeAct Black Pill V1.2] - Helpful page | ||
| − | + | == Black Pill Reserved Pins == | |
* PA0 - On-board USER KEY - needs INPUT_PULLUP | * PA0 - On-board USER KEY - needs INPUT_PULLUP | ||
| Line 45: | Line 45: | ||
* PA9 - Serial TX1 | * PA9 - Serial TX1 | ||
* PA10 - Serial RX1 | * PA10 - Serial RX1 | ||
| + | |||
| + | == Black Pill Card Schematic == | ||
| + | |||
| + | [https://github.com/land-boards/lb-boards/blob/master/Arduino%20Cards/Black-Pill-Hub/Documents/BlackPillBoard/MiniF4x1Cx_V30%20SchDoc.pdf Schematic] | ||
| + | |||
| + | == Black Pill Mechanicals == | ||
| + | |||
| + | [[File:original-dimensions-STM32F401CCU6_WeAct_Black_Pill_V1.2.png]] | ||
| + | |||
| + | == Black Pill Programming == | ||
| + | |||
| + | === DFU Programming === | ||
| + | |||
| + | * Steps from [https://www.sgbotic.com/index.php?dispatch=pages.view&page_id=49 Programming|Program STM32 Black Pill (STM32F401 / F411) with Arduino IDE (Windows OS)] | ||
| + | ** Add the URL to Additional Board Manager URLs text box: | ||
| + | *** https://github.com/stm32duino/BoardManagerFiles/raw/master/STM32/package_stm_index.json | ||
| + | ** Go to Tools > Board > Boards Manager | ||
| + | ** Search for STM32, select latest version and click Install. | ||
| + | ** Download and install STM32CubeProg from ST.com: [https://www.st.com/en/development-tools/stm32cubeprog.html] | ||
| + | ** Start the STM32CubeProg | ||
| + | ** From the Tools > Board > STM32 Board, select Generic STM32F4 series | ||
| + | ** Select Tools > Board Part Number > BlackPill F411CE | ||
| + | ** Under USB Support, select CDC (generic "Serial" supersede U(S)ART) | ||
| + | ** Under Upload method, select SMT32CubeProgrammer(DFU) | ||
| + | ** Use the onboard BOOT0 and NRST button to put the board into bootloader mode: | ||
| + | *** press and hold the BOOT0 button | ||
| + | *** press and release NRST (reset) button to power cycle the processor | ||
| + | *** release BOOT0 button | ||
| + | ** Upload sketch | ||
| + | |||
| + | [[File:Arduino-Programming-Tools-Dropdown.png]] | ||
| + | |||
| + | === Other Programming === | ||
| + | |||
| + | * ST-LINK V2 | ||
| + | * [https://www.st.com/en/development-tools/flasher-stm32.html FLASHER-STM32] - STM32 Flash loader demonstrator (UM0462) | ||
| + | * From [https://www.st.com/content/ccc/resource/technical/document/application_note/51/5f/03/1e/bd/9b/45/be/CD00264342.pdf/files/CD00264342.pdf/jcr:content/translations/en.CD00264342.pdf AN3155] | ||
| + | [[File:SerialPropogramming (AN3155).PNG]] | ||
Latest revision as of 12:08, 6 February 2021
Contents
Black Pill Board Features
Not pin compatible with Blue Pill due to power pin locations
- Use on BLACK-PILL-HUB
- Can't be used on BLUE-PILL-HUB card without modifications
- STM32F401CCU6 or STM32F411CCU6 CPU
- STM32F401CCU6
- 84 MHz CPU clock
- 256 KB Flash
- 64 KB SRAM
- STM32F411CCU6
- 100 MHz CPU clock
- 512 KB Flash
- 128 KB SRAM
- 3.3V regulator
- 2x12-bit, A/D converter
- 7-channel DMA controller
- SPI, I2C, UART interfaces
- 7 timers
- STM32F401CCU6
- SPI ROM footprint
- Fits an W25Q32JVSSIQ
- 32 Mbit SPI Flash ROM,
- USB-C
- Reset button
- Power LED
- PC 13 LED
- SWD connector
- Warning: The +5V pins on this board are directly connected to the +5V pin of the USB connector. There is no protection in place. Do not power this board through USB and an external power supply at the same time.
- WeAct Black Pill V1.2 - Helpful page
Black Pill Reserved Pins
- PA0 - On-board USER KEY - needs INPUT_PULLUP
- PC13 - On-board LED
- PB2 - BOOT1
- Pulling this pin down by external hardware causes the board to boot to serial
- Can be ignored by unplugging USB (power) while holding both reset and BOOT1 buttons on the Black Pill card
- Release reset button first
- PA11 - USB-M
- PA12 - USB-P
- PA9 - Serial TX1
- PA10 - Serial RX1
Black Pill Card Schematic
Black Pill Mechanicals
Black Pill Programming
DFU Programming
- Steps from Programming|Program STM32 Black Pill (STM32F401 / F411) with Arduino IDE (Windows OS)
- Add the URL to Additional Board Manager URLs text box:
- Go to Tools > Board > Boards Manager
- Search for STM32, select latest version and click Install.
- Download and install STM32CubeProg from ST.com: [1]
- Start the STM32CubeProg
- From the Tools > Board > STM32 Board, select Generic STM32F4 series
- Select Tools > Board Part Number > BlackPill F411CE
- Under USB Support, select CDC (generic "Serial" supersede U(S)ART)
- Under Upload method, select SMT32CubeProgrammer(DFU)
- Use the onboard BOOT0 and NRST button to put the board into bootloader mode:
- press and hold the BOOT0 button
- press and release NRST (reset) button to power cycle the processor
- release BOOT0 button
- Upload sketch
Other Programming
- ST-LINK V2
- FLASHER-STM32 - STM32 Flash loader demonstrator (UM0462)
- From AN3155
.PNG)
