Arduino Based Test Station

Hardware

• Blue Pill Hub
• FTDI card
• NANO-BKOUT (alternate)
• PC running PuTTY
  • 115,200 baud

Personality EEPROM

• Tests cards without personality EEPROM
• Tests cards with personality EEPROM
  • Personality EEPROM follows Raspberry Pi Hat EEPROM format
  • Test station writes EEPROM
  • Test station uses EEPROM contents (if present) to determine which test to run

Reading EEPROM
Family=ODAS
Company=land-boards.com
Product=DIGIO-128

Cards Tested

Select the board type
1 - DIGIO16-I2C board
2 - DIGIO-128 board
3 - OptoIn8-I2C board
4 - OptoOut8-I2C board
5 - DIGIO32-I2C board
6 - PROTO16-I2C board
7 - ODAS-PSOC5 board
8 - ODAS-RELAY16 board
A - DIGIO-128/64 board
9 - TBD board
X - Boards without EEPROMs
Select board > X
Select the board type
1 - I2CIO8 board
2 - I2CIO8X board
3 - SWLEDX8-I2C board
4 - OPTOFast/Small Non-Inverting board
5 - OPTOFast/Small Inverting board
6 - I2C-RPT-01 board
7 - I2C-RPT-08 board
8 - OptoFastBi board

Cable Sets

• Particular cable sets for cards

Software

• ODAS Tester Github Repo