Difference between revisions of "AudioAmp380"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (→Design) |
Blwikiadmin (talk | contribs) (→Design) |
||
Line 3: | Line 3: | ||
== Design == | == Design == | ||
− | * LM380 2.5W Audio Power Amplifier | + | * [https://www.ti.com/lit/ds/symlink/lm380.pdf LM380] 2.5W Audio Power Amplifier |
** Wide Supply Voltage Range: 10V-22V | ** Wide Supply Voltage Range: 10V-22V | ||
** Low Quiescent Power Drain: 0.13W (VS= 18V) | ** Low Quiescent Power Drain: 0.13W (VS= 18V) | ||
Line 12: | Line 12: | ||
** Low Distortion | ** Low Distortion | ||
** Quiescent Output Voltage is at One-Half of the Supply Voltage | ** Quiescent Output Voltage is at One-Half of the Supply Voltage | ||
− | * Pre-amplifier | + | * [https://www.ti.com/lit/ds/symlink/ne5534.pdf NE5534] Pre-amplifier |
+ | ** Low-Noise Operational Amplifiers | ||
+ | ** Equivalent Input Noise Voltage 3.5 nV/√Hz Typ | ||
+ | ** Unity-Gain Bandwidth 10 MHz Typ | ||
+ | ** Common-Mode Rejection Ratio 100 dB Typ | ||
+ | ** Wide Supply-Voltage Range ±3 V to ±20 V | ||
+ | ** | ||
== Assembly Sheet == | == Assembly Sheet == | ||
[[LM380 Rev 1 Assembly Sheet]] | [[LM380 Rev 1 Assembly Sheet]] |
Revision as of 13:16, 28 September 2021
Design
- LM380 2.5W Audio Power Amplifier
- Wide Supply Voltage Range: 10V-22V
- Low Quiescent Power Drain: 0.13W (VS= 18V)
- Voltage Gain Fixed at 50 (34 dB)
- High Peak Current Capability: 1.3A
- Input Referenced to GND
- High Input Impedance: 150kΩ
- Low Distortion
- Quiescent Output Voltage is at One-Half of the Supply Voltage
- NE5534 Pre-amplifier
- Low-Noise Operational Amplifiers
- Equivalent Input Noise Voltage 3.5 nV/√Hz Typ
- Unity-Gain Bandwidth 10 MHz Typ
- Common-Mode Rejection Ratio 100 dB Typ
- Wide Supply-Voltage Range ±3 V to ±20 V