Difference between revisions of "0/10/20/30 dB Attenuator"

From Land Boards Wiki
Jump to navigation Jump to search
Line 46: Line 46:
  
 
[[file:ATTEN_0DB_1MHz_TO_900MHz_Cal.png]]
 
[[file:ATTEN_0DB_1MHz_TO_900MHz_Cal.png]]
 +
 +
=== 10 dB ===
 +
 +
[[file:ATTEN_10DB_1MHz_TO_900MHz_CalOnBoard.png]]
 +
 +
=== 20 dB ===
 +
 +
[[file:ATTEN_20DB_1MHz_TO_900MHz_CalOnBoard.png]]
  
 
=== 30 dB ===
 
=== 30 dB ===
  
 
[[file:ATTEN_30DB_1MHz_TO_900MHz_CalOnBoard.png]]
 
[[file:ATTEN_30DB_1MHz_TO_900MHz_CalOnBoard.png]]

Revision as of 15:43, 3 October 2021

  • DC-4.0GHz 200mW DC 4.0GHz RF Fixed Attenuator SMA Double Female Head 0dB 10dB 20dB 30dB

ATTEN4 CHINA PCB.PNG

Specs

  • From the AliExpress listing
  • Frequency range: DC - 4.0GHz
  • Maximum power: 23dBm (200mW)
  • Standing wave ratio: ≤ 1.20
  • System impedance: 50Ω
  • RF interface: SMA double female head (Outer screw inner hole)
  • Attenuation:
    • Direct: 0dB (reference)
    • Level 1: 10 ± 0.8 dB
    • Level 2: 20 ± 1.1 dB
    • Level 3: 30 ± 1.5dB

Measurements

  • NanoVNA
    • 1 to 900 MHz
    • Through calibrated with SMA barrel and same cables was flat

0 dB

ATTEN 0DB 1MHz TO 900MHz.png

10 dB

ATTEN 10DB 1MHz TO 900MHz.png

20 dB

ATTEN 20DB 1MHz TO 900MHz.png

30 dB

ATTEN 30DB 1MHz TO 900MHz.png

Calibrating NanoVNA through the card

  • Calibrate on pass through

0 dB

ATTEN 0DB 1MHz TO 900MHz Cal.png

10 dB

ATTEN 10DB 1MHz TO 900MHz CalOnBoard.png

20 dB

ATTEN 20DB 1MHz TO 900MHz CalOnBoard.png

30 dB

ATTEN 30DB 1MHz TO 900MHz CalOnBoard.png

Retrieved from "http://land-boards.com/blwiki/index.php?title=0/10/20/30_dB_Attenuator&oldid=9612"