Difference between revisions of "IOP16 Front Panel interface"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (Created page with "== Front Panel == This is a standalone application of the Land Boards Front Panel card that uses the IOP16B CPU. file:EightBitFrontPanel720px.JPG === VHDL Code === * V...") |
Blwikiadmin (talk | contribs) |
||
| Line 47: | Line 47: | ||
</pre> | </pre> | ||
| + | |||
| + | * [https://github.com/douggilliland/Design_A_CPU/tree/main/Peripherals/FrontPanel01 Top level GitHub] | ||
| + | ** [https://github.com/douggilliland/Design_A_CPU/blob/main/Peripherals/FrontPanel01/FrontPanel01_test.vhd FrontPanel01_test.vhd - Top level entity] | ||
== I/O Processor - Memory Map == | == I/O Processor - Memory Map == | ||
Latest revision as of 17:27, 11 April 2022
Front Panel
This is a standalone application of the Land Boards Front Panel card that uses the IOP16B CPU.
VHDL Code
- VHDL code to "autonomously" talk to Land Boards FrontPanel-01 card
- Great for FPGA Retro-computers
- Converts pushbuttons into raw, debounced, and toggled outputs
- Uses IOP16 small CPU core
- Example: 6800 running MIKBUG using the Front Panel - Run/Halt the CPU, Read SRAM, ROM, etc, Write to SRAM
- Reads 32 pushbuttons
- i_FPLEDs, Out to LEDs (32)
- o_PBRaw, Raw version of the Pushbuttons (32)
- o_PBLatched, Latched version of the Pushbuttons (32)
- o_PBToggled, Toggle version of the Pushbuttons (32)
- Writes 32 LEDs
VHDL Entity
-- -------------------------------------------------------------------------------------------------------
-- Front Panel starts here
fp01 : work.FrontPanel01
port map
(
-- Clock and reset
i_CLOCK_50 => i_CLOCK_50, -- Clock (50 MHz)
i_n_reset => w_resetClean_n, -- Reset
-- 32 outs, 32 ins
i_FPLEDs => w_LEDsOut, -- Out to LEDs (32)
o_PBRaw => w_PBsRaw, -- Raw version of the Pushbuttons (32)
o_PBLatched => w_PBLatched, -- Latched version of the Pushbuttons (32)
o_PBToggled => w_PBsToggled, -- Toggle version of the Pushbuttons (32)
-- I2C interface
io_I2C_SCL => io_I2C_SCL, -- I2C clock to Front Panel card
io_I2C_SDA => io_I2C_SDA, -- I2C data to/from Front Panel card
i_I2C_INTn => i_I2C_INTn -- Interrupt input - active low
);
-- Front Panel ends here
-- -------------------------------------------------------------------------------------------------------
I/O Processor - Memory Map
- Address, R/W, Descr
- x00, R, Pushbuttons(31..24)
- x01, R, Pushbuttons(23..16)
- x02, R, Pushbuttons(15..8)
- x03, R, Pushbuttons(7..0)
- x04-x5, R, I2C I/F
- x04 - I2C Read Data
- x05 - I2C Status
- 0x06. R, I2C Interript
- x00, W, LEDs(31..24)
- x01, W, LEDs(23..16)
- x02, W, LEDs(15..8)
- x03, W, LEDs(7..0)
- x04-x5, W, I2C I/F
- x04 - I2C Write Data
- x05 - I2C Command
