|
|
| (180 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | == Synth Modules == | + | == Synth Modules (Standalone) == |
| | | | |
| − | * Synthesizer interfaces and modules
| + | * [[Synth Modules (Standalone)]] |
| − | ** [[MIDI-IN-OUT]] - MIDI In/Out
| |
| − | ** [[SCF-2]] - Dual 3.5mm Audio Jacks (Scale, Clip, Filter_
| |
| − | ** [[SYNTH-VCO-01]] - Synth Voltage Controlled Oscillator
| |
| − | ** [[SYNTH-MIDI-CTL-01]] - Synth MIDI Controller
| |
| − | ** [[SYNTH-MIDI-CV4-01]] - 4 Output MIDI to CV controller
| |
| | | | |
| − | === MIDI-IN-OUT === | + | == Eurorack Modules == |
| | | | |
| − | [[file:MIDI-IN-OUT_REV1_FRONT_3D.png]] | + | * [[Eurorack Synth Modules]] |
| | | | |
| − | * [[MIDI-IN-OUT]] - MIDI In/Out
| + | == MOD Designs == |
| − | * MIDI In/Out Jacks
| |
| − | * 5V MIDI
| |
| − | * 3.3V or 5V Serial connections
| |
| − | * MIDI In is opto-isolated
| |
| − | * (2) 4-40 Mounting holes
| |
| | | | |
| − | === SCF-2 ===
| + | * [[Synth Mod Designs]] |
| − | | |
| − | * [[SCF-2]] - Dual 3.5mm Audio Jacks (Scale, Clip, Filter) | |
| − | | |
| − | [[FILE:SCF-2_REV_1_FRONT_3D.png]]
| |
| − | | |
| − | * Digital Inputs or Outputs
| |
| − | * (2) 3.5mm Jacks
| |
| − | * Scaling resistors
| |
| − | * Schottky Clamping Diodes
| |
| − | * Filter cap
| |
| − | * Ring pin brought to connector
| |
| − | ** Ring pin is not used in Synth applications
| |
| − | ** Card can be used as a 3.5mm breakout
| |
| − | * (2) 4-40 mounting holes
| |
| − | | |
| − | === SYNTH-VCO-01 ===
| |
| − | | |
| − | * [[SYNTH-VCO-01]] - Synth Voltage Controlled Oscillator
| |
| − | | |
| − | [[FILE:SYNTH-VCO-01_REV1_FRONT_3D.png]]
| |
| − | | |
| − | * Build of [https://note.com/solder_state/n/nca6a1dec3921 Pico VCO by HAGIWO]
| |
| − | * Digital Voltage Controlled Oscillator (VCO)
| |
| − | * Three modes: Wavefold, FM and AM
| |
| − | * PWM output with 2 pole low pass filter
| |
| − | * Each mode has eight built-in waveforms
| |
| − | * [http://land-boards.com/blwiki/index.php?title=QT_Py_(RP2040_based) XIAO RP2040] CPU
| |
| − | * (5) Pushbuttons
| |
| − | ** Octave Up/Down
| |
| − | ** Mode Up/Down (Wavefold, FM and AM)
| |
| − | ** Push Timbre switches between 8 waveforms
| |
| − | * (2) Knobs
| |
| − | ** Freq fine adjust
| |
| − | ** Mod adjust
| |
| − | * Standard EuroRack 16 pin header
| |
| − | ** Supports 12V in with on-board 5V regulator
| |
| − | ** 5V regulator can be not installed if 5V is available on EuroRack connection
| |
| − | * Card is '''not''' a Eurorack card
| |
| − | ** Probably too deep, needs cabling
| |
| − | * (4) 6-32 mounting holes
| |
| − | ** Stacks with [[SYNTH-MIDI-CTL-01]] card
| |
| − | | |
| − | === SYNTH-MIDI-CTL-01 ===
| |
| − | | |
| − | * [[SYNTH-MIDI-CTL-01]] - Synth MIDI Controller
| |
| − | | |
| − | [[FILE:SYNTH-MIDI_CTL-01_REV1_FRONT_3D.png]]
| |
| − | | |
| − | | |
| − | * Adapted from [https://note.com/solder_state/n/n17e028497eba HAGIWO's MIDI to CV module]
| |
| − | ** Translate from Japanese to English using browser
| |
| − | * [http://land-boards.com/blwiki/index.php?title=QT_Py_(RP2040_based) XAIO RP2040 CPU]
| |
| − | ** Arduino MIDI library has '''not''' yet been ported to Pico so will need to use CircuitPython
| |
| − | * MIDI In/Out
| |
| − | ** Standard MIDI Jacks
| |
| − | ** MIDI out jack for future functionality
| |
| − | * (2) 0-5V Analog CV outs
| |
| − | ** [https://www.mouser.com/ProductDetail/Microchip-Technology-Atmel/MCP4822-E-P?qs=sGAEpiMZZMtgJDuTUz7Xu5a0A%252BlHhkxt3QSpqvc4zyk%3D MCP4822 12-bit D/A] - SPI Interface
| |
| − | *** [https://www.mouser.com/datasheet/2/268/21953a-8929.pdf MCP4822 Datasheet]
| |
| − | ** Use with [[SYNTH-VCO-01]]
| |
| − | *** CV1 = V/OCT
| |
| − | *** CV2 = MOD
| |
| − | * (2) Digital Outs, eX:
| |
| − | ** Gate
| |
| − | ** Clock
| |
| − | * Pot supports setting Clock rate
| |
| − | * Standard EuroRack 16 pin header
| |
| − | ** Supports 12V in with on-board 5V regulator
| |
| − | ** 5V regulator can be not installed if 5V is available on EuroRack connection
| |
| − | * Card is '''not''' a Eurorack card
| |
| − | ** Probably too deep, needs cabling
| |
| − | * (6) 6-32 Mounting holes
| |
| − | ** Stacks with [[SYNTH-VCO-01]] card
| |
| − | | |
| − | === SYNTH-MIDI-CV4-01 ===
| |
| − | | |
| − | * [[SYNTH-MIDI-CV4-01]] - 4 Output MIDI to CV controller
| |
| − | | |
| − | [[FILE:SYNTH-MIDI_CV4-01_REV1_FRONT_3D.png]]
| |
| − | | |
| − | * Adapted from [https://note.com/solder_state/n/n17e028497eba HAGIWO's MIDI to CV module]
| |
| − | ** Translate from Japanese to English using browser
| |
| − | ** Removes Digital Outputs
| |
| − | ** Has 4 Analog Outputs instead of 2
| |
| − | * [http://land-boards.com/blwiki/index.php?title=QT_Py_(RP2040_based) XAIO RP2040 CPU]
| |
| − | ** Arduino MIDI library has '''not''' yet been ported to Pico so will need to use CircuitPython
| |
| − | * MIDI In
| |
| − | ** Standard MIDI Jacks
| |
| − | ** MIDI out jack for future functionality
| |
| − | * (4) 0-5V Analog CV outs
| |
| − | ** [https://www.mouser.com/ProductDetail/Microchip-Technology-Atmel/MCP4822-E-P?qs=sGAEpiMZZMtgJDuTUz7Xu5a0A%252BlHhkxt3QSpqvc4zyk%3D MCP4822 12-bit D/A] - SPI Interface
| |
| − | *** [https://www.mouser.com/datasheet/2/268/21953a-8929.pdf MCP4822 Datasheet]
| |
| − | ** Use with [[SYNTH-VCO-01]]
| |
| − | *** CV_1 = V/OCT
| |
| − | *** CV_2 = MOD
| |
| − | * Standard EuroRack 16 pin header
| |
| − | ** Supports 12V in with on-board 5V regulator
| |
| − | ** 5V regulator can be not installed if 5V is available on EuroRack connection
| |
| − | * Card is '''not''' a Eurorack card
| |
| − | ** Probably too deep, needs cabling
| |
| − | * (6) 6-32 Mounting holes
| |
| − | ** Stacks with [[SYNTH-VCO-01]] card
| |
| − | | |
| − | === Eurorack 5 Channel Mixer ===
| |
| − | | |
| − | * [[SYNTH-MIXER5-01]]
| |
| − | * Eurorack 6HP
| |
| − | * Adapted from [https://note.com/solder_state/n/nffc1a33053be HAGIWO's 5 Channel Mixer Module]
| |
| − | * Views: Front (controls), Parts side, Front Panel
| |
| − | | |
| − | [[FILE:SYNTH-MIXER5-01_SET_FRONT_3D.png]]
| |
| − | | |
| − | === Eurorack 6 Channel Mixer ===
| |
| − | | |
| − | * [[SYNTH-MIXER6-01]]
| |
| − | * Rear card is too tall to fit in rack between rail
| |
| − | ** Try tilting it in?
| |
| − | * Eurorack 6HP
| |
| − | * Adapted from [https://note.com/solder_state/n/nffc1a33053be HAGIWO's 5 Channel Mixer Module]
| |
| − | * Views: Front (controls), Parts side, Front Panel
| |
| − | | |
| − | [[FILE:SYNTH-MIXER6-01_SET_FRONT_3D.png]]
| |
| − | | |
| − | === Eurorack RP2040 VCO ===
| |
| − | | |
| − | * [[SYNTH-VCO-03]]
| |
| − | * Eurorack 6HP
| |
| − | * (3) Card set
| |
| − | * Views: Control Panel rear side, Control Panel controls side, Logic card component side, Logic card rear side, Front Panel
| |
| − | | |
| − | [[FILE:SYNTH-VCO_CTL-01-CARD_SET-3D.png]]
| |
| − | | |
| − | === Eurorack +/- 12V Power Supply ===
| |
| − | | |
| − | * [https://www.mouser.com/ProductDetail/Hammond-Manufacturing/166JB24?qs=gF4h2Znc3LDhQdyLDLdnew%3D%3D 115VAC in, 24V CT, 24 VA Transformer]
| |
| − | ** 12*1.414 = ~17V
| |
| − | *** Leaves 5V for regulator headroom and ripple
| |
| − | * [https://www.mouser.com/ProductDetail/511-L7812CV L7812CV, +12V, 1.5A Regulator]
| |
| − | * [https://www.mouser.com/ProductDetail/511-L7912CV L7912CV, -12V, 1.5A Regulator]
| |
| − | | |
| − | [[FILE:DUAL_LINEAR_PS_SCHEM.PNG]]
| |
| − | | |
| − | === Eurorack DIY Panel ===
| |
| − | | |
| − | * Front/Back View
| |
| − | * Left = top
| |
| − | | |
| − | [[file:EUROPANEL-6HP_rev1_front_rear-3d.png]]
| |
| − | | |
| − | * Based on HAGIWO design
| |
| − | | |
| − | <video type="youtube">mtH72Yjct5I</video>
| |
| − | | |
| − | * 6HP wide
| |
| − | * 3U tall
| |
| − | * Power and Ground bus on either side of the card
| |
| − | * Reduces wiring
| |
| − | * Slotted mounting holes
| |
| − | * 5mm Grid on rear side makes it easier to locate connectors for drilling
| |
| − | | |
| − | == Reference Docs ==
| |
| − | | |
| − | * [https://doepfer.de/home_e.htm Doepfer Eurocard inventor/specs]
| |
| − | ** [https://doepfer.de/a100_man/a100t_e.htm Principles of Voltage Control]
| |
| − | * [https://www.tigoe.com/pcomp/code/communication/midi/ MIDI Communication]
| |
| − | * [https://www.perfectcircuit.com/signal/midi-to-cv Creative Control Strategies: MIDI to CV]
| |
| − | * [https://www.behance.net/gallery/113377671/EuroPi-Making-EuroRack-Affordable EuroPi]
| |
| − | * [https://reverb.com/news/beginners-guide-to-eurorack-case-basics-oscillators-filters Eurorack Beginners Guide]
| |
| − | * [https://en.wikipedia.org/wiki/Eurorack Eurorack Wiki page]
| |
| − | * [https://github.com/clacktronics/AudioJacks KiCad Audio Jack Symbols]
| |
| − | * [https://www.midisoft.de/ MidiSoft]
| |
| − | ** [https://www.midisoft.de/EuroRackDimensions/EuroRack_Dimensions.html EuroRack Dimensions]
| |
| − | ** [https://www.midisoft.de/EuroRackDimensions/holes.jpg Panel Holes]
| |
| − | * [https://minimidi.world/#how-trs-midi-works A simplified guide to TRS MIDI]
| |
| − | * [https://www.midi.org/midi-articles/updated-how-to-make-your-own-3-5mm-mini-stereo-trs-to-midi-5-pin-din-cables How to Make Your Own 3.5mm mini stereo TRS-to-MIDI 5 pin DIN cables]
| |
| − | * [https://division-6.com/learn/eurorack-power/ Eurorack Power Connectors]
| |
| − | | |
| − | === Projects ===
| |
| − | | |
| − | * [https://github.com/elkayem/midi2cv elkayem midi2cv GitHub page] - Nano based project
| |
| − | ** Arduino MIDI library has '''not''' yet been ported to Pico so will need to use Python
| |
| − | ** Drives 4 CV outputs: Pitch Blend, Control, Note, Velocity
| |
| − | ** This card only drives Note (Voltes/Oct, Mod)
| |
| − | * [https://github.com/benevpi/PicoPicoSynth PicoPicoSynth]
| |
| − | * [https://github.com/Deftaudio/Midi-boards Deftaudio GitHub] - KiCad footprints
| |
| − | * [http://graybloomfield.com/guitar/synth/midi2cv/ graybloomfield] - Very nice Arduino based designs
| |
| − | * [https://github.com/TomWhitwell/TuringMachine Turing Machine]
| |
| − | * [https://github.com/gavD/arduino-drum-machine DIY Hackable Arduino Drum Machine]
| |
| − | ** [https://www.youtube.com/watch?v=4u4Px2gMwGw vIDEO]
| |
| − | | |
| − | === Other Notes ===
| |
| − | | |
| − | === Daughterboard Heights ====
| |
| − | | |
| − | * From notes on [https://www.youtube.com/watch?v=HMDGYm91Q1Y How to Make Great Looking Modular Front Panels - Part 3 Module Circuit Board Layout]
| |
| − | ** The absolute maximum of other boards I've seen is 111,5 mm and the TipTop Happy Ending Kit offers a space of 112,5 mm
| |
| − | | |
| − | ==== Part Orientations ====
| |
| − | | |
| − | * For pots with built-in pointers, pot pins go down for pointer to go up at center point
| |
| − | | |
| − | === Module Kits ===
| |
| − | | |
| − | * [https://www.ericasynths.lv/ Erica Synths]
| |
| − | ** [https://github.com/erica-synths/diy-eurorack Erica Synths DIY GitHub]
| |
| − | * [https://syntherjack.net/category/project/ SyntherJack] - DIY Synths
| |
| − | * [https://www.befaco.org/# BEFACO] - Kits
| |
| − | * [https://store.kassutronics.net/eurorack-diy-c-1/ Kassutronics] DIY Store
| |
| − | ** [https://github.com/kassu/kassutronics Kassutronics] DIY GitHub
| |
| − | * [http://musicfromouterspace.com/index.php?MAINTAB=HOME&VPW=1024&VPH=500 Music From Outer Space]
| |
| − | * [https://www.thonk.co.uk/shop/ Thonk Shop] - in UK
| |
| − | * [https://www.synthrotek.com/ synthrotek]
| |
| − | * [https://github.com/TomWhitwell/TuringMachine TuringMachine Mark 2]
| |
| − | | |
| − | === Software ===
| |
| − | | |
| − | * [https://docs.circuitpython.org/projects/midi/en/latest/api.html adafruit_midi CircuitPython API]
| |
| − | ** [https://github.com/adafruit/Adafruit_CircuitPython_MIDI/tree/main/examples Example code]
| |
| − | * [https://learn.adafruit.com/raspberry-pi-pico-led-arcade-button-midi-controller-fighter/coding-the-raspberry-pi-pico-midi-controller MIDI Controller in Python]
| |
| − | * [http://www.midieditor.org/ MidiEditor]
| |
| − | * [https://hello-world.blog.ss-blog.jp/2016-10-16 Convert binary files to C data arrays (Arduino)] - In Japanese
| |
| − | * [https://github.com/AntumDeluge/bin2header Binary to C Array]
| |
| − | * [https://sensorium.github.io/Mozzi/ Arduino Mozzi Library]
| |
| − | | |
| − | === Hardware/Parts ===
| |
| − | | |
| − | * [https://store.synthrotek.com/ Synthrotek Store]
| |
| − | * [https://www.thonk.co.uk/shop/thonkiconn/ THONKICONN – 3.5MM JACK SOCKETS]
| |
| − | * Potentiometers are usually marked with an "A" for logarithmic taper or a "B" for linear taper;
| |
| − | | |
| − | === Samples ===
| |
| − | | |
| − | * [https://samplefocus.com/tag/drums Drum Samples]
| |
| − | | |
| − | == HAGIWO Builds ==
| |
| − | | |
| − | {| class="wikitable"
| |
| − | ! FUNCTION
| |
| − | ! 3.5MM
| |
| − | ! POTS
| |
| − | ! TOGG
| |
| − | ! PBS
| |
| − | ! ROT
| |
| − | ! DIN5
| |
| − | ! CPU
| |
| − | ! LINK
| |
| − | |-
| |
| − | | MIDI-IN-OUT
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 2
| |
| − | | NONE
| |
| − | |
| |
| − | |-
| |
| − | | SCF-2
| |
| − | | 2
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | |
| |
| − | |-
| |
| − | | SYNTH-MIDI-CTL-01
| |
| − | | 4
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 2
| |
| − | | XAIO RP2040
| |
| − | |
| |
| − | |-
| |
| − | | SYNTH-MIDI-CV4-01
| |
| − | | 4
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 2
| |
| − | | XAIO RP2040
| |
| − | |
| |
| − | |-
| |
| − | | SYNTH-MIXER6-01
| |
| − | | 7
| |
| − | | 7
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/nffc1a33053be
| |
| − | |-
| |
| − | | SYNTH-VCO-01
| |
| − | | 4
| |
| − | | 2
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | XAIO RP2040
| |
| − | | https://note.com/solder_state/n/nca6a1dec3921
| |
| − | |-
| |
| − | | SYNTH-VCO-03
| |
| − | | 4
| |
| − | | 2
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | XAIO RP2040
| |
| − | | https://note.com/solder_state/n/nca6a1dec3921
| |
| − | |-
| |
| − | | No.56 Sample Drum
| |
| − | | 3
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | ESP32C3
| |
| − | | https://note.com/solder_state/n/n950ed088c3cb
| |
| − | |-
| |
| − | | No.55 V2164 Dual VCA
| |
| − | | 6
| |
| − | | 6
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/nd82c027d0597
| |
| − | |-
| |
| − | | No.54 PT2399 clock sync delay
| |
| − | | 4
| |
| − | | 3
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/nf6dc0a61e26d
| |
| − | |-
| |
| − | | No.52 Reverse step sequencer
| |
| − | | 4
| |
| − | | 8
| |
| − | | 2
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | CDT7350
| |
| − | | https://note.com/solder_state/n/n13c49f08ca1f
| |
| − | |-
| |
| − | | No.50 LFO/VCO rebuild
| |
| − | | 2
| |
| − | | 3
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO/AD9833
| |
| − | | https://note.com/solder_state/n/nd2c22a73e8fe
| |
| − | |-
| |
| − | | No.49 Clock Divider
| |
| − | | 11
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | TC4040BP
| |
| − | | https://note.com/solder_state/n/n7979cda44dcb
| |
| − | |-
| |
| − | | No. 47 Sample & hold
| |
| − | | 3
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | LF398
| |
| − | | https://note.com/solder_state/n/n29b52f4f01f1
| |
| − | |-
| |
| − | | No.46 Dual Envelope generator
| |
| − | | 4
| |
| − | | 8
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n6fb73eb1d8b8
| |
| − | |-
| |
| − | | No.45 Diode clip Distortion
| |
| − | | 2
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/n5f35e2e84a3e
| |
| − | |-
| |
| − | | No.44 Wave shaper & VCA
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/nfdc2e198255a
| |
| − | |-
| |
| − | | No.43 Envelope Follower
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/n110e9ba066b3
| |
| − | |-
| |
| − | | No.42 PCM drum
| |
| − | | 6
| |
| − | | 4
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | NSX-1/SAMD
| |
| − | | https://note.com/solder_state/n/neabe7e014c11
| |
| − | |-
| |
| − | | No.40 Voltage controlled switch
| |
| − | | 8
| |
| − | | 1
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | NJU211
| |
| − | | https://note.com/solder_state/n/n98883e71f814
| |
| − | |-
| |
| − | | No.39 Diode ladder VCF
| |
| − | | 3
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/n598f23105ec4
| |
| − | |-
| |
| − | | No.38 Touch controller
| |
| − | | 5
| |
| − | | 1
| |
| − | | 1
| |
| − | | 4*
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO/MPR121
| |
| − | | https://note.com/solder_state/n/ncd42925f726b
| |
| − | |-
| |
| − | | No.37 Overflow folding VCO
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | XIAO
| |
| − | | https://note.com/solder_state/n/nf01e7c92b010
| |
| − | |-
| |
| − | | No.36 LM13700 Dual VCA
| |
| − | | 6
| |
| − | | 2
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | LM13700
| |
| − | | https://note.com/solder_state/n/n3357199504d8
| |
| − | |-
| |
| − | | No.35 CV to MIDI
| |
| − | | 6
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | NANO/SSD1306
| |
| − | | https://note.com/solder_state/n/nb618127f37c9
| |
| − | |-
| |
| − | | No.33 Dual Quantizer
| |
| − | | 7
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | SAMD/SSD1306
| |
| − | | https://note.com/solder_state/n/nb8b9a2f212a2
| |
| − | |-
| |
| − | | No.32 Spin FV-1 multi FX
| |
| − | | 5
| |
| − | | 5
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO/FV-1
| |
| − | | https://note.com/solder_state/n/n1c402a78a0fe
| |
| − | |-
| |
| − | | No.31 Ring modulator & wavefold
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | AD633
| |
| − | | https://note.com/solder_state/n/n9d138d74b39d
| |
| − | |-
| |
| − | | No.30 Euclidean rhythm sequencer
| |
| − | | 7
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | NANO/SSD1306
| |
| − | | https://note.com/solder_state/n/n433b32ea6dbc
| |
| − | |-
| |
| − | | No.29 SH-101 type sequencer
| |
| − | | 7
| |
| − | | 1 TRIM
| |
| − | | 0
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | SAMD/SSD1306
| |
| − | | https://note.com/solder_state/n/n80f4baf81226
| |
| − | |-
| |
| − | | No.28 DSP multi effector
| |
| − | | 2
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | DSP
| |
| − | | https://note.com/solder_state/n/nd9c984a9ab7a
| |
| − | |-
| |
| − | | No.27 5ch mixer
| |
| − | | 6
| |
| − | | 6
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NONE
| |
| − | | https://note.com/solder_state/n/nffc1a33053be
| |
| − | |-
| |
| − | | No.26 V2044 VCF
| |
| − | | 3
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | V2044 VCF
| |
| − | | https://note.com/solder_state/n/n0fabdc23fe1e
| |
| − | |-
| |
| − | | No.25 Oscillo scope & Spectrum analyzer
| |
| − | | 3
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | NANO/SSD1306
| |
| − | | https://note.com/solder_state/n/n6b4cc8d1c6b9
| |
| − | |-
| |
| − | | No.24 V2164 Dual VCA
| |
| − | | 6
| |
| − | | 2
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | V2164
| |
| − | | https://note.com/solder_state/n/n14a8be5f7118
| |
| − | |-
| |
| − | | No.23 CHORD VCO
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n681d2e07e324
| |
| − | |-
| |
| − | | No.22 Additive VCO
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n30b3a8737b1e
| |
| − | |-
| |
| − | | No.20 CV/GATE 8step sequencer
| |
| − | | 3
| |
| − | | 8
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | CD4022BE /NE555
| |
| − | | https://note.com/solder_state/n/n4da93d157f26
| |
| − | |-
| |
| − | | No.19 FM VCO
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n88317851a4c7
| |
| − | |-
| |
| − | | No.18 2OSC VCO
| |
| − | | 3
| |
| − | | 3
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n71c67b5aaeca
| |
| − | |-
| |
| − | | No.17 Multi mode Envelope generator
| |
| − | | 2
| |
| − | | 4
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n69643b792274
| |
| − | |-
| |
| − | | No.16 CV/Gate sequencer & Arpeggiator
| |
| − | | 5
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | NANO/SSD1306
| |
| − | | https://note.com/solder_state/n/n7c2809976698
| |
| − | |-
| |
| − | | No.15 TR-808/909 sample player drum
| |
| − | | 5
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | SAMD/SSD1306
| |
| − | | https://note.com/solder_state/n/n0209d16d0d08
| |
| − | |-
| |
| − | | No.14 KICK
| |
| − | | 3
| |
| − | | 4
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/ne33e32660d50
| |
| − | |-
| |
| − | | No.13 Noise & Hi-hat
| |
| − | | 4
| |
| − | | 3
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/nf65437f12790
| |
| − | |-
| |
| − | | No.12 Clock SYNC LFO
| |
| − | | 2
| |
| − | | 4
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n4c600f2431c3
| |
| − | |-
| |
| − | | No.11 MIDI to CV
| |
| − | | 4
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n17e028497eba
| |
| − | |-
| |
| − | | No.10 Gate Burst/Delay
| |
| − | | 4
| |
| − | | 2
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n28b5c43229af
| |
| − | |-
| |
| − | | No.9 6ch trigger sequencer
| |
| − | | 7
| |
| − | | 0
| |
| − | | 0
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | NANO/SSD1306
| |
| − | | https://note.com/solder_state/n/n17c69afd484d
| |
| − | |-
| |
| − | | No.8 SX150 VCF
| |
| − | | 3
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO/MCP4726
| |
| − | | https://note.com/solder_state/n/n5136d98930a8
| |
| − | |-
| |
| − | | No.7 Quantizer
| |
| − | | 4
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | NANO/MCP4726
| |
| − | | https://note.com/solder_state/n/nde97a0516f03
| |
| − | |-
| |
| − | | No.6 Clock multi divide
| |
| − | | 4
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO
| |
| − | | https://note.com/solder_state/n/n8907f2f6e8f5
| |
| − | |-
| |
| − | | No.5 Generative sequencer
| |
| − | | 3
| |
| − | | 2
| |
| − | | 1
| |
| − | | 0
| |
| − | | 0
| |
| − | | 0
| |
| − | | NANO/MCP4911
| |
| − | | https://note.com/solder_state/n/n8a489f0b857a
| |
| − | |-
| |
| − | | No.4 samplar
| |
| − | | 3
| |
| − | | 1
| |
| − | | 1
| |
| − | | 0
| |
| − | | 1
| |
| − | | 0
| |
| − | | NANO/TF PLAYER
| |
| − | | https://note.com/solder_state/n/n6057a5256042
| |
| − | |-
| |
| − | |}
| |
| − | | |
| − | == Videos ==
| |
| − | | |
| − | * Hooking together modules
| |
| − | | |
| − | <video type="youtube">J0iUN2B4aBQ</video>
| |
| − | | |
| − | <video type="youtube">UOQezMJ560o</video>
| |
