Difference between revisions of "Eurorack Box Build"

Latest revision as of 11:06, 12 April 2023

Glued together/clamped
- Didn't use screws
Did not use 1/4-20 screws to mount rails
- Drilled small holes into back of rails and screwed rails down w/ wood screws
Rails are flush to box edges
Next one
- Screw in rails, power supply, power strip before gluing up box

@@ Line 2: / Line 2: @@
 [[file:Eurorack_Plywood_Box_02_cropped-720px.jpg]]
-=== Box Construction ===
+== Features ==
-* 3/4" plywood
+* 3/4" Red Oak plywood
-* 84 HP
+* Spar varnish finish (not finished in photo)
-* 18-3/8" Wide
+* [https://store.synthrotek.com/Eurorack-Rails_p_379.html Synthrotek 84 HP rails] with [https://store.synthrotek.com/Eurorack-3mm-Threaded-Nut-Strips-Pair_p_565.html threaded nut strips] (both come in pairs)
-* 6-1/2" tall
+* 18-3/8" Wide, 84HP
+* 6-1/2" tall, 3U
 * 4-3/4" deep
+== Box Construction ==
 * Glued together/clamped
-** Didn't use Need screws
+** Didn't use screws
-* Did '''not''' use 1/4-20 screws, drilled small holes into back of rails and screwed rails down w/ wood screws
+* Did '''not''' use 1/4-20 screws to mount rails
+** Drilled small holes into back of rails and screwed rails down w/ wood screws
 * Rails are flush to box edges
 * Next one
-** Screw in rails before gluing up box
+** Screw in rails, power supply, power strip before gluing up box
-=== Box Hotel Services ===
+== Box Hotel Services ==
 * Mean Well Power Supply
@@ Line 27: / Line 32: @@
 [[file:Nelson_Power_Board-720px.jpg]]
+* Nelson Audio Power connections
+* LEDs
+** RED = +5V
+** YEL = +12V
+** BLU = -12V
+[[file:Nelson_Pwr_Conns.PNG]]
+=== POW - Power Control Module ===
+* [https://www.tindie.com/products/Sourcery/pow-modular-power-panel/ POW - Modular Power Panel] - Tindie page
+[[file:POW_front_rear720px.jpg]]
+* LEDs
+** RED = +5V
+** YEL = +12V
+** BLU = -12V