Difference between revisions of "Synth Mod Designs"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (Created page with " * Good for prototyping, but not Eurorack * Stackable via standoffs * 100mm wide * 47mm deep * 4-40 mounting holes === MOD-SCF-JACKS === MOD-CF-JACKS file:MOD-SCF-JAC...") |
Blwikiadmin (talk | contribs) |
||
| Line 1: | Line 1: | ||
| + | == Overview == | ||
* Good for prototyping, but not Eurorack | * Good for prototyping, but not Eurorack | ||
Latest revision as of 14:33, 26 October 2022
Contents
Overview
- Good for prototyping, but not Eurorack
- Stackable via standoffs
- 100mm wide
- 47mm deep
- 4-40 mounting holes
MOD-SCF-JACKS
MOD-DIY
- DIY "breadboard"
- Rear pins bs to top/bottom
- Extra connections on edge
- Busses marked on silkscreen
- (2) Horizontal busses in center for power/ground
MOD-MIDI-THRU
- DIN-5 in
- (4) TRS Type A outs
MOD-NANO-CPU
- Arduino NANO
- Runs MOZZI Arduino library
- MOZZI audio output
- Standard or HiFi
- MIDI In on TRS Type A
- Remove J4 (EN_MIDI) when USB is plugged into NANO CPU
MOD-POTS
- 4 pots
- Type A = "Audio" log pots
- Used for Volume controls
- Type B = Linear pots
- Used for CV
- Type A = "Audio" log pots
- All pins brought to connector
- Headers to optionally pull pot ends up/down
- Can be used as controls (end pulled up/down or volume controls (CW, CCW brought to pins)
- Optional R/C filter
MOD-XIAO-RP2040-CPU
- XIAO RP2040 CPU
- MIDI In on TRS Type A
- (4) Analog Inputs or Digital GPIO
- (7) Digital GPIO
- SD Card on RP2040 SPI bus
