Difference between revisions of "Arduino Pro Mini"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 9: | Line 9: | ||
** 512B EEPROM | ** 512B EEPROM | ||
* 3.3V or 5V versions | * 3.3V or 5V versions | ||
| + | ** The regulator should be marked K850(5.0V) or K833(3.3V). | ||
| + | *** A 5 volt part has a 16MHz resonator may be marked with "A1" or "A'N" | ||
| + | *** A 3.3 volt part has a 8MHz resonator may be marked with "80'0" | ||
* Several different "additional" pad configurations | * Several different "additional" pad configurations | ||
| Line 14: | Line 17: | ||
[[file:ArduinoProMini-735px.jpg]] | [[file:ArduinoProMini-735px.jpg]] | ||
| + | |||
| + | [[file:ArdruinoProMini-EBAY_PART-720px.png]] | ||
== Schematic == | == Schematic == | ||
Latest revision as of 14:53, 26 November 2022
Arduino Pro Mini
- Atmel ATMEGA328PAU
- 8-bit CPU
- 32KB EPROM
- 2KB SRAM
- 512B EEPROM
- 3.3V or 5V versions
- The regulator should be marked K850(5.0V) or K833(3.3V).
- A 5 volt part has a 16MHz resonator may be marked with "A1" or "A'N"
- A 3.3 volt part has a 8MHz resonator may be marked with "80'0"
- The regulator should be marked K850(5.0V) or K833(3.3V).
- Several different "additional" pad configurations
Pinout
Schematic
Breadboard Version
