Difference between revisions of "Eurorack Box Build"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 5: | Line 5: | ||
* 3/4" Red Oak plywood | * 3/4" Red Oak plywood | ||
| − | * Spar varnish finish ( | + | * Spar varnish finish (not finished in photo) |
* [https://store.synthrotek.com/Eurorack-Rails_p_379.html Synthrotek 84 HP rails] with [https://store.synthrotek.com/Eurorack-3mm-Threaded-Nut-Strips-Pair_p_565.html threaded nut strips] (both come in pairs) | * [https://store.synthrotek.com/Eurorack-Rails_p_379.html Synthrotek 84 HP rails] with [https://store.synthrotek.com/Eurorack-3mm-Threaded-Nut-Strips-Pair_p_565.html threaded nut strips] (both come in pairs) | ||
* 18-3/8" Wide, 84HP | * 18-3/8" Wide, 84HP | ||
| Line 11: | Line 11: | ||
* 4-3/4" deep | * 4-3/4" deep | ||
| − | + | == Box Construction == | |
* Glued together/clamped | * Glued together/clamped | ||
| Line 21: | Line 21: | ||
** Screw in rails, power supply, power strip before gluing up box | ** Screw in rails, power supply, power strip before gluing up box | ||
| − | + | == Box Hotel Services == | |
* Mean Well Power Supply | * Mean Well Power Supply | ||
| Line 32: | Line 32: | ||
[[file:Nelson_Power_Board-720px.jpg]] | [[file:Nelson_Power_Board-720px.jpg]] | ||
| + | |||
| + | * Nelson Audio Power connections | ||
| + | * LEDs | ||
| + | ** RED = +5V | ||
| + | ** YEL = +12V | ||
| + | ** BLU = -12V | ||
| + | |||
| + | [[file:Nelson_Pwr_Conns.PNG]] | ||
| + | |||
| + | === POW - Power Control Module === | ||
| + | |||
| + | * [https://www.tindie.com/products/Sourcery/pow-modular-power-panel/ POW - Modular Power Panel] - Tindie page | ||
| + | |||
| + | [[file:POW_front_rear720px.jpg]] | ||
| + | |||
| + | * LEDs | ||
| + | ** RED = +5V | ||
| + | ** YEL = +12V | ||
| + | ** BLU = -12V | ||
Latest revision as of 11:06, 12 April 2023
Features
- 3/4" Red Oak plywood
- Spar varnish finish (not finished in photo)
- Synthrotek 84 HP rails with threaded nut strips (both come in pairs)
- 18-3/8" Wide, 84HP
- 6-1/2" tall, 3U
- 4-3/4" deep
Box Construction
- Glued together/clamped
- Didn't use screws
- Did not use 1/4-20 screws to mount rails
- Drilled small holes into back of rails and screwed rails down w/ wood screws
- Rails are flush to box edges
- Next one
- Screw in rails, power supply, power strip before gluing up box
Box Hotel Services
- Mean Well Power Supply
- RT-85B
- 88W Power Supply
- 5V, 8A
- +12V, 3.5A
- -12V, 0.5A
- RT-85B
- Nelson Audio 16.6” 24 Plug Power Bus Board for Eurorack Modular Synths
- Nelson Audio Power connections
- LEDs
- RED = +5V
- YEL = +12V
- BLU = -12V
POW - Power Control Module
- POW - Modular Power Panel - Tindie page
- LEDs
- RED = +5V
- YEL = +12V
- BLU = -12V
