Difference between revisions of "Eurorack Box Build"

From Land Boards Wiki
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 5: Line 5:
  
 
* 3/4" Red Oak plywood
 
* 3/4" Red Oak plywood
* Spar varnish finish (no finished in photo)
+
* Spar varnish finish (not finished in photo)
 
* [https://store.synthrotek.com/Eurorack-Rails_p_379.html Synthrotek 84 HP rails] with [https://store.synthrotek.com/Eurorack-3mm-Threaded-Nut-Strips-Pair_p_565.html threaded nut strips] (both come in pairs)
 
* [https://store.synthrotek.com/Eurorack-Rails_p_379.html Synthrotek 84 HP rails] with [https://store.synthrotek.com/Eurorack-3mm-Threaded-Nut-Strips-Pair_p_565.html threaded nut strips] (both come in pairs)
 
* 18-3/8" Wide, 84HP
 
* 18-3/8" Wide, 84HP
Line 32: Line 32:
  
 
[[file:Nelson_Power_Board-720px.jpg]]
 
[[file:Nelson_Power_Board-720px.jpg]]
 +
 +
* Nelson Audio Power connections
 +
* LEDs
 +
** RED = +5V
 +
** YEL = +12V
 +
** BLU = -12V
 +
 +
[[file:Nelson_Pwr_Conns.PNG]]
 +
 +
=== POW - Power Control Module ===
 +
 +
* [https://www.tindie.com/products/Sourcery/pow-modular-power-panel/ POW - Modular Power Panel] - Tindie page
 +
 +
[[file:POW_front_rear720px.jpg]]
 +
 +
* LEDs
 +
** RED = +5V
 +
** YEL = +12V
 +
** BLU = -12V

Latest revision as of 11:06, 12 April 2023

Eurorack Plywood Box 02 cropped-720px.jpg

Features

Box Construction

  • Glued together/clamped
    • Didn't use screws
  • Did not use 1/4-20 screws to mount rails
    • Drilled small holes into back of rails and screwed rails down w/ wood screws
  • Rails are flush to box edges
  • Next one
    • Screw in rails, power supply, power strip before gluing up box

Box Hotel Services

Nelson Power Board-720px.jpg

  • Nelson Audio Power connections
  • LEDs
    • RED = +5V
    • YEL = +12V
    • BLU = -12V

Nelson Pwr Conns.PNG

POW - Power Control Module

POW front rear720px.jpg

  • LEDs
    • RED = +5V
    • YEL = +12V
    • BLU = -12V