Difference between revisions of "DigIO16-I2C"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| (16 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[File:tindie-mediums.png|link=https://www.tindie.com/products/5160/]] | ||
| + | |||
[[File:DigIO16-I2C-X3-CCA-5454-640px.jpg]] | [[File:DigIO16-I2C-X3-CCA-5454-640px.jpg]] | ||
| Line 4: | Line 6: | ||
* 16 bit GPIO | * 16 bit GPIO | ||
| − | * [ | + | ** [https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP23017-Data-Sheet-DS20001952.pdf MCP23017 Datasheet] - Rev D |
| + | ** [https://hackaday.com/2023/02/03/mcp23017-went-through-shortage-hell-lost-two-inputs/?fbclid=IwAR1ktG1CsU7ns5fmTYXdlpBLdqaJmBioXrVrG1_Lgqe8MTQr1AY4rp6IETU MCP23017... LOST TWO INPUTS] | ||
| + | *** MCP23017 now a 14/16-bit expander, with two of the pins (GPA7 and GPB7) losing their input capabilities | ||
| + | *** The chips look the same, are called the same, and act mostly the same — if you don’t download the latest version of the datasheet (Revision D), you’d never know that there’s been a change | ||
** I2C host interface | ** I2C host interface | ||
** 100/400 KHZ operation | ** 100/400 KHZ operation | ||
** 25mA sink/source capability per I/O | ** 25mA sink/source capability per I/O | ||
| − | * Jumper selectable terminators | + | * Jumper selectable I2C terminators |
* 3-bit address (Jumper selectable) - Up to 8 boards | * 3-bit address (Jumper selectable) - Up to 8 boards | ||
* I2C Connector | * I2C Connector | ||
| Line 14: | Line 19: | ||
* Power Connector | * Power Connector | ||
* DB-25 Connector for GPIO lines | * DB-25 Connector for GPIO lines | ||
| − | * 24LC024 Personality EEPROM | + | * [https://www.mouser.com/ProductDetail/579-24LC024-P 24LC024] [[Open_Data_Acquisition_System#Personality_EEPROM|ODAS Personality EEPROM]] |
| + | ** pid = 1 | ||
* 3.3V or 5V operation | * 3.3V or 5V operation | ||
* Compatible with Arduino, Raspberry Pi, BeagleBone Black | * Compatible with Arduino, Raspberry Pi, BeagleBone Black | ||
| Line 22: | Line 28: | ||
== Connectors == | == Connectors == | ||
| − | == J1 - Power Connector (Optional) == | + | === J1 - Power Connector (Optional) === |
[[File:DIGIO16-I2C-X2-J1-POWER.PNG]] | [[File:DIGIO16-I2C-X2-J1-POWER.PNG]] | ||
| − | == J2, J3 - Daisy-chained I2C Connectors == | + | === J2, J3 - Daisy-chained I2C Connectors === |
[[File:DIGIO16-I2C-X2-J2-I2C.PNG]] | [[File:DIGIO16-I2C-X2-J2-I2C.PNG]] | ||
| − | == J4 - Address Base Jumpers == | + | === J4 - Address Base Jumpers === |
* Install for address bit = 0 | * Install for address bit = 0 | ||
| Line 36: | Line 42: | ||
[[File:DIGIO16-I2C-X2-J4-ADR.PNG]] | [[File:DIGIO16-I2C-X2-J4-ADR.PNG]] | ||
| − | == J5 - Interrupt/Card Present == | + | === J5 - Interrupt/Card Present === |
[[File:DIGIO16-I2C-X2-J5-INT.PNG]] | [[File:DIGIO16-I2C-X2-J5-INT.PNG]] | ||
| − | == J6 - I2C Terminators == | + | === J6 - I2C Terminators === |
[[File:DIGIO16-I2C-X2-J6-I2C-TERM.PNG]] | [[File:DIGIO16-I2C-X2-J6-I2C-TERM.PNG]] | ||
| − | == J7 - Write Enable Jumper == | + | === J7 - Write Enable Jumper === |
* Install to enable writes | * Install to enable writes | ||
| Line 50: | Line 56: | ||
[[File:DIGIO16-I2C-X2-J7-WR-ENABLE.PNG]] | [[File:DIGIO16-I2C-X2-J7-WR-ENABLE.PNG]] | ||
| − | == == | + | === J8 - DB-25F I/O connector === |
[[File:DIGIO16-I2C-X2-J8-DIGIO.PNG]] | [[File:DIGIO16-I2C-X2-J8-DIGIO.PNG]] | ||
| Line 58: | Line 64: | ||
* [http://land-boards.com/DigIO16-I2C/DigIO16-I2C_X3_Schematic.pdf Schematic] | * [http://land-boards.com/DigIO16-I2C/DigIO16-I2C_X3_Schematic.pdf Schematic] | ||
| − | == Driver == | + | == Drivers == |
| + | |||
| + | === Arduino === | ||
| + | |||
| + | * [https://github.com/land-boards/lb-Arduino-Code/tree/master/libraries/LandBoards_MCP23017 LandBoards_MCP23017 Driver code] | ||
| + | * [https://github.com/land-boards/lb-Arduino-Code/tree/master/libraries/LandBoards_MCP23017/examples/PROTO16I2CBlink LandBoards_MCP23017 Example code] | ||
| + | |||
| + | === Raspberry Pi === | ||
| + | |||
| + | * [https://github.com/land-boards/RasPi/blob/master/RPI-I2C-Hub/RPI-I2C-Hub-2x16/RPI-I2C-Hub-2x16.py Example code] | ||
| + | |||
| + | === Raspberry Pi Pico === | ||
| + | |||
| + | ==== MMBASIC ==== | ||
| − | * [https://github.com/land-boards/ | + | * [https://github.com/land-boards/RasPiPico/blob/main/PicoMite_MMBASIC/PicoMite_VGA/Land%20Boards%20BASIC%20Programs/SWLEDX8-01.bas SWLEDX8-01.bas] - Read 8x switches, write 8x LEDs |
| − | * [https://github.com/land-boards/ | + | * [https://github.com/land-boards/RasPiPico/blob/main/PicoMite_MMBASIC/PicoMite_VGA/Land%20Boards%20BASIC%20Programs/lbcards/GPIO16-02.bas MMBASIC Example Code] - Bounce a bit across the 16-bits (not for use with [[SWLEDX8]] card) |
== Assembly Sheet == | == Assembly Sheet == | ||
Latest revision as of 14:44, 4 February 2023
Features
- 16 bit GPIO
- MCP23017 Datasheet - Rev D
- MCP23017... LOST TWO INPUTS
- MCP23017 now a 14/16-bit expander, with two of the pins (GPA7 and GPB7) losing their input capabilities
- The chips look the same, are called the same, and act mostly the same — if you don’t download the latest version of the datasheet (Revision D), you’d never know that there’s been a change
- I2C host interface
- 100/400 KHZ operation
- 25mA sink/source capability per I/O
- Jumper selectable I2C terminators
- 3-bit address (Jumper selectable) - Up to 8 boards
- I2C Connector
- Daisy-chained 4-pin host interface connector (Ground, Power, Clock, Data)
- Power Connector
- DB-25 Connector for GPIO lines
- 24LC024 ODAS Personality EEPROM
- pid = 1
- 3.3V or 5V operation
- Compatible with Arduino, Raspberry Pi, BeagleBone Black
- 95x95mm form factor
- (4) 6-32 mounting holes - one on each corner
Connectors
J1 - Power Connector (Optional)
J2, J3 - Daisy-chained I2C Connectors
J4 - Address Base Jumpers
- Install for address bit = 0
J5 - Interrupt/Card Present
J6 - I2C Terminators
J7 - Write Enable Jumper
- Install to enable writes
J8 - DB-25F I/O connector
Schematic
Drivers
Arduino
Raspberry Pi
Raspberry Pi Pico
MMBASIC
- SWLEDX8-01.bas - Read 8x switches, write 8x LEDs
- MMBASIC Example Code - Bounce a bit across the 16-bits (not for use with SWLEDX8 card)
