Difference between revisions of "ArduinoInABox"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 11: | Line 11: | ||
** Rotary Encoder | ** Rotary Encoder | ||
** Leave attached until installing in box | ** Leave attached until installing in box | ||
| − | * 3 BNC | + | * 3 BNC or SMA connectors |
** Brought to headers | ** Brought to headers | ||
* Wide input voltage range | * Wide input voltage range | ||
** RF filters on OLED and into board | ** RF filters on OLED and into board | ||
** Mini360 Switching Mode Power Supply | ** Mini360 Switching Mode Power Supply | ||
| + | * I/O Boards | ||
| + | * Easily designed | ||
| + | ** DB25 pass-through | ||
* Mounts in a standard box | * Mounts in a standard box | ||
Revision as of 19:00, 17 October 2021
Features
- 3.3 or 5V Arduino Pro Mini
- Arduino pins brought to 2x13 header
- P2-P13, A0-A3
- A4/A5 or SDA/SCL
- Detachable HID
- OLED
- Rotary Encoder
- Leave attached until installing in box
- 3 BNC or SMA connectors
- Brought to headers
- Wide input voltage range
- RF filters on OLED and into board
- Mini360 Switching Mode Power Supply
- I/O Boards
- Easily designed
- DB25 pass-through
- Mounts in a standard box
I/O Card
- Connectors are placed on 0.1" grid
- 26 pin, 3 BNC/SMA connectors
DB-25 Example
- Standard DB-25 female
- Similar to (but narrower and female)
Mechanicals/Enclosure
- Board is designed to fit into Aluminum Project Box Enclosure DIY 100*76*35mm - ebay search
- VFO-003 - Similar in a box
