Difference between revisions of "ArduinoInABox"

Revision as of 19:06, 17 October 2021

Arduino Pro Mini
- Inexpensive and widely available
- 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers
A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.
- 3.3 or 5V
- 8 MHz or 16 MHz
- Programmable in Arduino IDE
Detachable Human Interface design (HID)
- OLED
- Rotary Encoder with switch
- Can leave attached until installing in box
Wide input voltage range
- RF filters on OLED and into board
- Mini360 Switching Mode Power Supply
I/O Boards
- Arduino pins brought to 2x13 header
  - P2-P13, A0-A3
  - A4/A5 or SDA/SCL
- Easily designed
- 3 BNC or SMA connectors
  - Brought to headers
  - DB25 pass-through
Mounts in a standard box

Board is designed to fit into Aluminum Project Box Enclosure DIY 100*76*35mm - ebay search

@@ Line 5: / Line 5: @@
 * [https://www.arduino.cc/en/pmwiki.php?n=Main/ArduinoBoardProMini Arduino Pro Mini]
 ** Inexpensive and widely available
-** 4 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers
+** 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers
 * A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.
 ** 3.3 or 5V