Difference between revisions of "ArduinoInABox"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 7: | Line 7: | ||
* Flexible Input power | * Flexible Input power | ||
* I/O Boards | * I/O Boards | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
* Mounts in a standard box | * Mounts in a standard box | ||
| Line 54: | Line 46: | ||
=== I/O Boards === | === I/O Boards === | ||
| − | * | + | ** Arduino pins brought to 2x13 header |
| − | ** | + | *** I/O pins are on 0.1" grid for easier prototyping |
| + | *** P2-P13, A0-A3 | ||
| + | *** A4/A5 or SDA/SCL | ||
| + | ** Easily designed | ||
| + | ** 3 BNC or SMA connectors | ||
| + | *** Brought to headers | ||
| + | *** DB25 pass-through | ||
==== DB-25 Example ==== | ==== DB-25 Example ==== | ||
Revision as of 19:27, 17 October 2021
Contents
Features
- Arduino Pro Mini
- Detachable Human Interface design (HID)
- Flexible Input power
- I/O Boards
- Mounts in a standard box
Arduino Pro Mini
- Inexpensive and widely available
- I/O
- 14 digital input/output pins (of which 6 can be used as PWM outputs)
- 6 analog inputs
- On-board resonator
- Reset button
- A six pin header can be connected to an FTDI cable provide USB power and communication to the board
- 3.3 or 5V
- 8 MHz (3.3V or 16 MHz (5V)
- Programmable in Arduino IDE
File:Http://land-boards.com/blwiki/images/c/c5/ArdruinoProMini-EBAY PART-720px.png
Detachable Human Interface design (HID)
- OLED
- 128x32 or 128x64
- u8x8 driver - 6.2KB overhead
- Rotary Encoder with switch
- Can leave attached to main board until installing in box
Input power
- Wide input voltage range
- 5-23V (for 3.3V Arduino Pro Mini)
- 7-23V (for 5V Arduino Pro Mini)
- 2.1mm DC Power Connector Jack
- RF filter into Switching regulator board
- 2nd RF filter into HID card
- Mini360 Switching Mode Power Supply
- About $1
I/O Boards
- Arduino pins brought to 2x13 header
- I/O pins are on 0.1" grid for easier prototyping
- P2-P13, A0-A3
- A4/A5 or SDA/SCL
- Easily designed
- 3 BNC or SMA connectors
- Brought to headers
- DB25 pass-through
- Arduino pins brought to 2x13 header
DB-25 Example
- Standard DB-25 female
- Similar to (but narrower and female)
Mechanicals/Enclosure
- Board is designed to fit into Aluminum Project Box Enclosure DIY 100*76*35mm - ebay search
- VFO-003 - Similar in a box
