Difference between revisions of "Arduino Based Test Station"

From Land Boards Wiki
Jump to navigation Jump to search
Line 31: Line 31:
  
 
[[file:BlackPill_Config.png]]
 
[[file:BlackPill_Config.png]]
 +
 +
== Programming ==
 +
 +
=== DFU Programming ===
 +
 +
* Steps from [https://www.sgbotic.com/index.php?dispatch=pages.view&page_id=49 Programming|Program STM32 Black Pill (STM32F401 / F411) with Arduino IDE (Windows OS)]
 +
** Add the URL to Additional Board Manager URLs text box:
 +
*** https://github.com/stm32duino/BoardManagerFiles/raw/master/STM32/package_stm_index.json
 +
** Go to Tools > Board > Boards Manager
 +
** Search for STM32, select latest version and click Install.
 +
** Download and install STM32CubeProg from ST.com: [https://www.st.com/en/development-tools/stm32cubeprog.html]
 +
** Start the STM32CubeProg
 +
** From the Tools > Board > STM32 Board, select Generic STM32F4 series
 +
** Select Tools > Board Part Number > BlackPill F411CE
 +
** Under USB Support, select CDC (generic "Serial" supersede U(S)ART)
 +
** Under Upload method, select SMT32CubeProgrammer(DFU)
 +
** Use the onboard BOOT0 and NRST button to put the board into bootloader mode:
 +
*** press and hold the BOOT0 button
 +
*** press and release NRST (reset) button to power cycle the processor
 +
*** release BOOT0 button
 +
*** Sometimes removing the USB cable and plugging it back in while pressing BOOT0 button works better
 +
** Upload sketch
 +
 +
[[File:Arduino-Programming-Tools-Dropdown.png]]
 +
 +
* Displays in IDE
 +
 +
<pre>
 +
USB speed  : Full Speed (12MBit/s)
 +
Manuf. ID  : STMicroelectronics
 +
Product ID  : STM32  BOOTLOADER
 +
SN          : 348C35983539
 +
FW version  : 0x011a
 +
Device ID  : 0x0431
 +
Device name : STM32F411xC/E
 +
Flash size  : 512 KBytes (default)
 +
Device type : MCU
 +
Device CPU  : Cortex-M4
 +
 +
 +
 +
Memory Programming ...
 +
Opening and parsing file: ODASTESTER.ino.bin
 +
  File          : ODASTESTER.ino.bin
 +
  Size          : 49132 Bytes
 +
  Address      : 0x08000000
 +
 +
 +
Erasing memory corresponding to segment 0:
 +
Erasing internal memory sectors [0 2]
 +
erasing sector 0000 @: 0x08000000 done
 +
erasing sector 0001 @: 0x08004000 done
 +
erasing sector 0002 @: 0x08008000 done
 +
Download in Progress:
 +
 +
 +
File download complete
 +
Time elapsed during download operation: 00:00:02.263
 +
 +
RUNNING Program ...
 +
  Address:      : 0x8000000
 +
Start operation achieved successfully
 +
</pre>
 +
 +
=== Other Programming ===
 +
 +
* ST-LINK V2
 +
* [https://www.st.com/en/development-tools/flasher-stm32.html FLASHER-STM32] - STM32 Flash loader demonstrator (UM0462)
 +
* From [https://www.st.com/content/ccc/resource/technical/document/application_note/51/5f/03/1e/bd/9b/45/be/CD00264342.pdf/files/CD00264342.pdf/jcr:content/translations/en.CD00264342.pdf AN3155]
 +
[[File:SerialPropogramming (AN3155).PNG]]
  
 
== Cards Tested ==
 
== Cards Tested ==

Revision as of 10:17, 8 March 2022

DIGIO32-I2C P1994 720px.jpg

Hardware

Personality EEPROM

  • Tests cards without personality EEPROM
  • Tests cards with personality EEPROM
    • Personality EEPROM follows Raspberry Pi Hat EEPROM format
    • Test station writes EEPROM
    • Test station uses EEPROM contents (if present) to determine which test to run
Reading EEPROM
Family=ODAS
Company=land-boards.com
Product=DIGIO-128

Black Pill Setup

BlackPill Config.png

Programming

DFU Programming

  • Steps from Programming|Program STM32 Black Pill (STM32F401 / F411) with Arduino IDE (Windows OS)
    • Add the URL to Additional Board Manager URLs text box:
    • Go to Tools > Board > Boards Manager
    • Search for STM32, select latest version and click Install.
    • Download and install STM32CubeProg from ST.com: [1]
    • Start the STM32CubeProg
    • From the Tools > Board > STM32 Board, select Generic STM32F4 series
    • Select Tools > Board Part Number > BlackPill F411CE
    • Under USB Support, select CDC (generic "Serial" supersede U(S)ART)
    • Under Upload method, select SMT32CubeProgrammer(DFU)
    • Use the onboard BOOT0 and NRST button to put the board into bootloader mode:
      • press and hold the BOOT0 button
      • press and release NRST (reset) button to power cycle the processor
      • release BOOT0 button
      • Sometimes removing the USB cable and plugging it back in while pressing BOOT0 button works better
    • Upload sketch

Arduino-Programming-Tools-Dropdown.png

  • Displays in IDE
USB speed   : Full Speed (12MBit/s)
Manuf. ID   : STMicroelectronics
Product ID  : STM32  BOOTLOADER
SN          : 348C35983539
FW version  : 0x011a
Device ID   : 0x0431
Device name : STM32F411xC/E
Flash size  : 512 KBytes (default)
Device type : MCU
Device CPU  : Cortex-M4



Memory Programming ...
Opening and parsing file: ODASTESTER.ino.bin
  File          : ODASTESTER.ino.bin
  Size          : 49132 Bytes
  Address       : 0x08000000 


Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 2]
erasing sector 0000 @: 0x08000000 done
erasing sector 0001 @: 0x08004000 done
erasing sector 0002 @: 0x08008000 done
Download in Progress:


File download complete
Time elapsed during download operation: 00:00:02.263

RUNNING Program ... 
  Address:      : 0x8000000
Start operation achieved successfully

Other Programming

SerialPropogramming (AN3155).PNG

Cards Tested

Select the board type
1 - DIGIO16-I2C board
2 - DIGIO-128 board
3 - OptoIn8-I2C board
4 - OptoOut8-I2C board
5 - DIGIO32-I2C board
6 - PROTO16-I2C board
7 - ODAS-PSOC5 board
8 - ODAS-RELAY16 board
A - DIGIO-128/64 board
9 - TBD board
X - Boards without EEPROMs
Select board > X
Select the board type
1 - I2CIO8 board
2 - I2CIO8X board
3 - SWLEDX8-I2C board
4 - OPTOFast/Small Non-Inverting board
5 - OPTOFast/Small Inverting board
6 - I2C-RPT-01 board
7 - I2C-RPT-08 board
8 - OptoFastBi board

Cable Sets

  • Particular cable sets for cards

Software

Retrieved from "http://land-boards.com/blwiki/index.php?title=Arduino_Based_Test_Station&oldid=11667"