LED32-DB37

Features

• 32 LEDs
• 95mm wide (ODAS width) - 55mm depth matches other ODAS cards ODAS-PSOC5 (Rev X3 or higher), DIGIO32-I2C, etc
• DB-37 male connector
• (5) Ground pins (common ground)
• 3mm LEDs
• 6-32 mounting holes

Series resistor - let us know what value you want

• Series Resistor Values
• Pick a series resistor value assuming the LED forward voltage is about 2V.
• Operating with 3.3V will require a smaller resistance than operating at 5V for the same current.
• Standard series resistor values we carry are: 120, 150, 200, 220, 240, 270, 330, 470, 560, and 1K.
• For 5V operation and not too bright LED (comfortable value for front panels) we use 560 ohms.
• With 3V across 560 ohms that's only 5 mA (for 560 ohm resistor). For something with a lot of LEDs if they are too bright it can get annoying.

Wiring

• Male and female connectors are flipped
• Female from front

• Male from front

LED	DB37 Female	DB37 Male		LED	DB37 Female	DB37 Male
GND	1	19		GND	20	37
0	2	18		16	21	36
1	3	17		17	22	35
2	4	16		18	23	34
3	5	15		19	24	33
4	6	14		20	25	32
5	7	13		21	26	31
6	8	12		22	27	30
7	9	11		23	28	29
8	10	10		24	29	28
9	11	9		25	30	27
10	12	8		26	31	26
11	13	7		27	32	25
12	14	6		28	33	24
13	15	5		29	34	23
14	16	4		30	35	22
15	17	3		31	36	21
GND	18	2		GND	37	20
GND	19	1

Rear Side Marking

Mechanicals

Assembly Sheet

• LED32-DB37 Assembly Sheet