Difference between revisions of "QMTECH Cyclone 10CL006 FPGA Card"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (→U8) |
Blwikiadmin (talk | contribs) (→U8) |
||
| Line 98: | Line 98: | ||
=== U8 === | === U8 === | ||
| − | * Cannot place output or bidirectional pin J8IO[ | + | * Cannot place output or bidirectional pin J8IO[35] in input pin location M16 |
| − | * Cannot place output or bidirectional pin J8IO[ | + | * Cannot place output or bidirectional pin J8IO[36] in input pin location M15 |
* Cannot place output or bidirectional pin J8IO[57] in input pin location E16 | * Cannot place output or bidirectional pin J8IO[57] in input pin location E16 | ||
* Cannot place output or bidirectional pin J8IO[58] in input pin location E15 | * Cannot place output or bidirectional pin J8IO[58] in input pin location E15 | ||
| + | |||
[[file:U8_C10.PNG]] | [[file:U8_C10.PNG]] | ||
Latest revision as of 14:45, 27 August 2022
Contents
Specification
- Mounts to RETRO-EP4CE15
- FPGA: 10CL006YU256C8G
- On-Board FPGA external crystal frequency: 50MHz
- Block RAM resource - 30 of M9K blocks
- 6K LEs
- On-Board 32MB Micron SDRAM，MT48LC16M16A2-75
- On-Board 3.3V power supply for FPGA by using MP2359 wide input range DC/DC
- Two 64p, 2.54mm pitch headers for extending user IOs
- 3 user switches
- 2 user LEDs
- JTAG interface, by using 10p, 2.54mm pitch male header
- PCB size is: 6.7cm x 8.4cm
- Default power source for board is: 1A@5V DC, the DC header type: DC-050, 5.5mmx2.1mm
- Cyclone10 10CL006 GitHub
- AliExpress listing
Resources
- 10CL006 is comparable to Cyclone IV EP4CE6 FPGA
- 30 1Kx9 RAM blocks
- Power LED - D4 (On when 5V is applied)
- nCONFIG - SW3 - FPGA PIN_H5
- JP5 - 5V
| To | Direction | Location | I/O Standard | Pull-Up |
|---|---|---|---|---|
| i_clk | Input | PIN_E1 | 3.3-V LVTTL | |
| i_SW1 | Input | PIN_F3 | 3.3-V LVTTL | on |
| i_n_reset | Input | PIN_J6 | 3.3-V LVTTL | on |
| USR_LED | Output | PIN_L9 | 3.3-V LVTTL |
Connectors
Configuration EEPROM
LEDs
- Power LED - D4 (On when 5V is applied)
- User LED - LED_D5 - FPGA Pin_L9 (pull low to illuminate LED)
Pushbuttons
- KEY0 - SW1 - FPGA Pin_F3
- RESET_N- SW2 - FPGA PIN_J6
- nCONFIG - SW3 - FPGA PIN_H5
SDRAM
U7
U8
- Cannot place output or bidirectional pin J8IO[35] in input pin location M16
- Cannot place output or bidirectional pin J8IO[36] in input pin location M15
- Cannot place output or bidirectional pin J8IO[57] in input pin location E16
- Cannot place output or bidirectional pin J8IO[58] in input pin location E15
Programmer - Create jic file
- .jic file
- Device EPCQ64
- Active Serial
- Programming File Type: *.jic
- Advanced = Check both Disables...
- Select Flash Loader
- Adv Options
- Click first 2 boxes
- Programmer
Pin List
- Used on RETRO-EP4CE15 card
| To | Direction | Location | I/O Standard | Pull-Up |
|---|---|---|---|---|
| cts1 | Input | PIN_D11 | 3.3-V LVTTL | |
| hSync | Output | PIN_D14 | 3.3-V LVTTL | |
| i_clk | Input | PIN_E1 | 3.3-V LVTTL | |
| i_key1 | Input | PIN_F3 | 3.3-V LVTTL | on |
| i_n_reset | Input | PIN_J6 | 3.3-V LVTTL | on |
| n_sdRamCas | Output | PIN_M7 | 3.3-V LVTTL | |
| n_sdRamCe | Output | PIN_P8 | 3.3-V LVTTL | |
| n_sdRamRas | Output | PIN_M8 | 3.3-V LVTTL | |
| n_sdRamWe | Output | PIN_P6 | 3.3-V LVTTL | |
| n_sRamCS | Output | PIN_E5 | 3.3-V LVTTL | |
| n_sRamOE | Output | PIN_A3 | 3.3-V LVTTL | |
| n_sRamWE | Output | PIN_B7 | 3.3-V LVTTL | |
| o_UsrLed | Output | PIN_L9 | 3.3-V LVTTL | |
| ps2Clk | Bidir | PIN_G1 | 3.3-V LVTTL | on |
| ps2Data | Bidir | PIN_G2 | 3.3-V LVTTL | on |
| rts1 | Output | PIN_B10 | 3.3-V LVTTL | |
| rxd1 | Input | PIN_D12 | 3.3-V LVTTL | |
| sdCS | Output | PIN_B16 | 3.3-V LVTTL | |
| sdMISO | Input | PIN_C15 | 3.3-V LVTTL | on |
| sdMOSI | Output | PIN_A15 | 3.3-V LVTTL | |
| sdRamAddr[14] | Output | PIN_L8 | 3.3-V LVTTL | |
| sdRamAddr[13] | Output | PIN_N8 | 3.3-V LVTTL | |
| sdRamAddr[12] | Output | PIN_T2 | 3.3-V LVTTL | |
| sdRamAddr[11] | Output | PIN_R3 | 3.3-V LVTTL | |
| sdRamAddr[10] | Output | PIN_T6 | 3.3-V LVTTL | |
| sdRamAddr[9] | Output | PIN_T3 | 3.3-V LVTTL | |
| sdRamAddr[8] | Output | PIN_R4 | 3.3-V LVTTL | |
| sdRamAddr[7] | Output | PIN_T4 | 3.3-V LVTTL | |
| sdRamAddr[6] | Output | PIN_R5 | 3.3-V LVTTL | |
| sdRamAddr[5] | Output | PIN_T5 | 3.3-V LVTTL | |
| sdRamAddr[4] | Output | PIN_R6 | 3.3-V LVTTL | |
| sdRamAddr[3] | Output | PIN_T8 | 3.3-V LVTTL | |
| sdRamAddr[2] | Output | PIN_R8 | 3.3-V LVTTL | |
| sdRamAddr[1] | Output | PIN_T7 | 3.3-V LVTTL | |
| sdRamAddr[0] | Output | PIN_R7 | 3.3-V LVTTL | |
| sdRamClk | Output | PIN_P2 | 3.3-V LVTTL | |
| sdRamClkEn | Output | PIN_R1 | 3.3-V LVTTL | |
| sdRamData[15] | Input | PIN_J2 | 3.3-V LVTTL | |
| sdRamData[14] | Input | PIN_J1 | 3.3-V LVTTL | |
| sdRamData[13] | Input | PIN_K2 | 3.3-V LVTTL | |
| sdRamData[12] | Input | PIN_K1 | 3.3-V LVTTL | |
| sdRamData[11] | Input | PIN_L2 | 3.3-V LVTTL | |
| sdRamData[10] | Input | PIN_L1 | 3.3-V LVTTL | |
| sdRamData[9] | Input | PIN_N1 | 3.3-V LVTTL | |
| sdRamData[8] | Input | PIN_N2 | 3.3-V LVTTL | |
| sdRamData[7] | Input | PIN_N5 | 3.3-V LVTTL | |
| sdRamData[6] | Input | PIN_P3 | 3.3-V LVTTL | |
| sdRamData[5] | Input | PIN_M6 | 3.3-V LVTTL | |
| sdRamData[4] | Input | PIN_N3 | 3.3-V LVTTL | |
| sdRamData[3] | Input | PIN_K6 | 3.3-V LVTTL | |
| sdRamData[2] | Input | PIN_L4 | 3.3-V LVTTL | |
| sdRamData[1] | Input | PIN_L3 | 3.3-V LVTTL | |
| sdRamData[0] | Input | PIN_K5 | 3.3-V LVTTL | |
| sdSCLK | Output | PIN_C16 | 3.3-V LVTTL | |
| serSelect | Input | |||
| sramAddress[19] | Output | PIN_D8 | 3.3-V LVTTL | |
| sramAddress[18] | Output | PIN_D9 | 3.3-V LVTTL | |
| sramAddress[17] | Output | PIN_B8 | 3.3-V LVTTL | |
| sramAddress[16] | Output | PIN_B9 | 3.3-V LVTTL | |
| sramAddress[15] | Output | PIN_E8 | 3.3-V LVTTL | |
| sramAddress[14] | Output | PIN_A9 | 3.3-V LVTTL | |
| sramAddress[13] | Output | PIN_A8 | 3.3-V LVTTL | |
| sramAddress[12] | Output | PIN_C9 | 3.3-V LVTTL | |
| sramAddress[11] | Output | PIN_C8 | 3.3-V LVTTL | |
| sramAddress[10] | Output | PIN_A7 | 3.3-V LVTTL | |
| sramAddress[9] | Output | PIN_A6 | 3.3-V LVTTL | |
| sramAddress[8] | Output | PIN_A4 | 3.3-V LVTTL | |
| sramAddress[7] | Output | PIN_C3 | 3.3-V LVTTL | |
| sramAddress[6] | Output | PIN_F5 | 3.3-V LVTTL | |
| sramAddress[5] | Output | PIN_C2 | 3.3-V LVTTL | |
| sramAddress[4] | Output | PIN_D1 | 3.3-V LVTTL | |
| sramAddress[3] | Output | PIN_B1 | 3.3-V LVTTL | |
| sramAddress[2] | Output | PIN_D3 | 3.3-V LVTTL | |
| sramAddress[1] | Output | PIN_B3 | 3.3-V LVTTL | |
| sramAddress[0] | Output | PIN_B4 | 3.3-V LVTTL | |
| sramData[7] | Bidir | PIN_A2 | 3.3-V LVTTL | |
| sramData[6] | Bidir | PIN_E6 | 3.3-V LVTTL | |
| sramData[5] | Bidir | PIN_D6 | 3.3-V LVTTL | |
| sramData[4] | Bidir | PIN_A5 | 3.3-V LVTTL | |
| sramData[3] | Bidir | PIN_B6 | 3.3-V LVTTL | |
| sramData[2] | Bidir | PIN_B5 | 3.3-V LVTTL | |
| sramData[1] | Bidir | PIN_C6 | 3.3-V LVTTL | |
| sramData[0] | Bidir | PIN_D4 | 3.3-V LVTTL | |
| txd1 | Output | PIN_A10 | 3.3-V LVTTL | |
| videoB0 | Output | PIN_B14 | 3.3-V LVTTL | |
| videoB1 | Output | PIN_A14 | 3.3-V LVTTL | |
| videoG0 | Output | PIN_B13 | 3.3-V LVTTL | |
| videoG1 | Output | PIN_A13 | 3.3-V LVTTL | |
| videoR0 | Output | PIN_B12 | 3.3-V LVTTL | |
| videoR1 | Output | PIN_A12 | 3.3-V LVTTL | |
| vSync | Output | PIN_C14 | 3.3-V LVTTL |
.qsf file
- Used on RETRO-EP4CE15 card
set_global_assignment -name FAMILY "Cyclone 10 LP" set_global_assignment -name DEVICE 10CL006YU256C8G set_global_assignment -name TOP_LEVEL_ENTITY uk101_41kRAM set_global_assignment -name ORIGINAL_QUARTUS_VERSION "13.0 SP1" set_global_assignment -name PROJECT_CREATION_TIME_DATE "14:00:12 MARCH 31, 2019" set_global_assignment -name LAST_QUARTUS_VERSION "21.1.0 Lite Edition" set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0 set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85 set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1 set_global_assignment -name POWER_PRESET_COOLING_SOLUTION "23 MM HEAT SINK WITH 200 LFPM AIRFLOW" set_global_assignment -name POWER_BOARD_THERMAL_MODEL "NONE (CONSERVATIVE)" set_global_assignment -name STRATIX_DEVICE_IO_STANDARD "3.3-V LVTTL" # Clock and reset set_location_assignment PIN_E1 -to clk set_location_assignment PIN_J6 -to n_reset set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to n_reset # LEDs # PS/2 set_location_assignment PIN_G1 -to ps2Clk set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to ps2Clk set_location_assignment PIN_G2 -to ps2Data set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to ps2Data # Serial set_location_assignment PIN_D12 -to fpgaRx set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to fpgaRx set_location_assignment PIN_A10 -to fpgaTx set_location_assignment PIN_B10 -to fpgaRts set_location_assignment PIN_D11 -to fpgaCts # Video set_location_assignment PIN_B12 -to vgaRedLo set_location_assignment PIN_A12 -to vgaRedHi set_location_assignment PIN_B13 -to vgaGrnLo set_location_assignment PIN_A13 -to vgaGrnHi set_location_assignment PIN_B14 -to vgaBluLo set_location_assignment PIN_A14 -to vgaBluHi set_location_assignment PIN_D14 -to vgaHsync set_location_assignment PIN_C14 -to vgaVsync # SD Card set_location_assignment PIN_B16 -to sdCS set_location_assignment PIN_C15 -to sdMISO set_location_assignment PIN_A15 -to sdMOSI set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sdMISO set_location_assignment PIN_C16 -to sdSCLK # SRAM set_location_assignment PIN_E5 -to n_sRamCS set_location_assignment PIN_A3 -to n_sRamOE set_location_assignment PIN_B7 -to n_sRamWE set_location_assignment PIN_D4 -to sramData[0] set_location_assignment PIN_C6 -to sramData[1] set_location_assignment PIN_B5 -to sramData[2] set_location_assignment PIN_B6 -to sramData[3] set_location_assignment PIN_A5 -to sramData[4] set_location_assignment PIN_D6 -to sramData[5] set_location_assignment PIN_E6 -to sramData[6] set_location_assignment PIN_A2 -to sramData[7] set_location_assignment PIN_B4 -to sramAddress[0] set_location_assignment PIN_B3 -to sramAddress[1] set_location_assignment PIN_D3 -to sramAddress[2] set_location_assignment PIN_B1 -to sramAddress[3] set_location_assignment PIN_D1 -to sramAddress[4] set_location_assignment PIN_C2 -to sramAddress[5] set_location_assignment PIN_F5 -to sramAddress[6] set_location_assignment PIN_C3 -to sramAddress[7] set_location_assignment PIN_A4 -to sramAddress[8] set_location_assignment PIN_A6 -to sramAddress[9] set_location_assignment PIN_A7 -to sramAddress[10] set_location_assignment PIN_C8 -to sramAddress[11] set_location_assignment PIN_C9 -to sramAddress[12] set_location_assignment PIN_A8 -to sramAddress[13] set_location_assignment PIN_A9 -to sramAddress[14] set_location_assignment PIN_E8 -to sramAddress[15] set_location_assignment PIN_B9 -to sramAddress[16] set_location_assignment PIN_B8 -to sramAddress[17] set_location_assignment PIN_D9 -to sramAddress[18] set_location_assignment PIN_D8 -to sramAddress[19] # set_location_assignment PIN_T10 -to IO_PIN[3] set_location_assignment PIN_R10 -to IO_PIN[4] set_location_assignment PIN_T11 -to IO_PIN[5] set_location_assignment PIN_R11 -to IO_PIN[6] set_location_assignment PIN_T12 -to IO_PIN[7] set_location_assignment PIN_R12 -to IO_PIN[8] set_location_assignment PIN_M9 -to IO_PIN[9] set_location_assignment PIN_N9 -to IO_PIN[10] set_location_assignment PIN_P9 -to IO_PIN[11] set_location_assignment PIN_M10 -to IO_PIN[12] set_location_assignment PIN_N11 -to IO_PIN[13] set_location_assignment PIN_P11 -to IO_PIN[14] set_location_assignment PIN_T13 -to IO_PIN[15] set_location_assignment PIN_R13 -to IO_PIN[16] set_location_assignment PIN_T14 -to IO_PIN[17] set_location_assignment PIN_T15 -to IO_PIN[18] set_location_assignment PIN_M11 -to IO_PIN[19] set_location_assignment PIN_N12 -to IO_PIN[20] set_location_assignment PIN_N13 -to IO_PIN[21] set_location_assignment PIN_R14 -to IO_PIN[22] set_location_assignment PIN_P14 -to IO_PIN[23] set_location_assignment PIN_N14 -to IO_PIN[24] set_location_assignment PIN_R16 -to IO_PIN[25] set_location_assignment PIN_P16 -to IO_PIN[26] set_location_assignment PIN_N15 -to IO_PIN[27] set_location_assignment PIN_N16 -to IO_PIN[28] set_location_assignment PIN_M15 -to IO_PIN[29] set_location_assignment PIN_M16 -to IO_PIN[30] set_location_assignment PIN_L15 -to IO_PIN[31] set_location_assignment PIN_L16 -to IO_PIN[32] set_location_assignment PIN_M12 -to IO_PIN[33] set_location_assignment PIN_P15 -to IO_PIN[34] set_location_assignment PIN_L13 -to IO_PIN[35] set_location_assignment PIN_L14 -to IO_PIN[36] set_location_assignment PIN_K15 -to IO_PIN[37] set_location_assignment PIN_K16 -to IO_PIN[38] set_location_assignment PIN_J12 -to IO_PIN[39] set_location_assignment PIN_K12 -to IO_PIN[40] set_location_assignment PIN_J13 -to IO_PIN[41] set_location_assignment PIN_J14 -to IO_PIN[42] set_location_assignment PIN_J11 -to IO_PIN[43] set_location_assignment PIN_K11 -to IO_PIN[44] set_location_assignment PIN_F11 -to IO_PIN[45] set_location_assignment PIN_G11 -to IO_PIN[46] set_location_assignment PIN_F14 -to IO_PIN[47] set_location_assignment PIN_F13 -to IO_PIN[48] # SDRAM set_location_assignment PIN_P2 -to sdRamClk set_location_assignment PIN_R1 -to sdRamClkEn set_location_assignment PIN_M7 -to n_sdRamCas set_location_assignment PIN_P8 -to n_sdRamCe set_location_assignment PIN_M8 -to n_sdRamRas set_location_assignment PIN_P6 -to n_sdRamWe set_location_assignment PIN_R7 -to sdRamAddr[0] set_location_assignment PIN_T7 -to sdRamAddr[1] set_location_assignment PIN_R8 -to sdRamAddr[2] set_location_assignment PIN_T8 -to sdRamAddr[3] set_location_assignment PIN_R6 -to sdRamAddr[4] set_location_assignment PIN_T5 -to sdRamAddr[5] set_location_assignment PIN_R5 -to sdRamAddr[6] set_location_assignment PIN_T4 -to sdRamAddr[7] set_location_assignment PIN_R4 -to sdRamAddr[8] set_location_assignment PIN_T3 -to sdRamAddr[9] set_location_assignment PIN_T6 -to sdRamAddr[10] set_location_assignment PIN_R3 -to sdRamAddr[11] set_location_assignment PIN_T2 -to sdRamAddr[12] set_location_assignment PIN_N8 -to sdRamAddr[13] set_location_assignment PIN_L8 -to sdRamAddr[14] set_location_assignment PIN_K5 -to sdRamData[0] set_location_assignment PIN_L3 -to sdRamData[1] set_location_assignment PIN_L4 -to sdRamData[2] set_location_assignment PIN_K6 -to sdRamData[3] set_location_assignment PIN_N3 -to sdRamData[4] set_location_assignment PIN_M6 -to sdRamData[5] set_location_assignment PIN_P3 -to sdRamData[6] set_location_assignment PIN_N5 -to sdRamData[7] set_location_assignment PIN_N2 -to sdRamData[8] set_location_assignment PIN_N1 -to sdRamData[9] set_location_assignment PIN_L1 -to sdRamData[10] set_location_assignment PIN_L2 -to sdRamData[11] set_location_assignment PIN_K1 -to sdRamData[12] set_location_assignment PIN_K2 -to sdRamData[13] set_location_assignment PIN_J1 -to sdRamData[14] set_location_assignment PIN_J2 -to sdRamData[15]
