Difference between revisions of "SYNTH-MIDI-CTL-01"

Revision as of 08:53, 23 September 2022

Adapted from HAGIWO's MIDI to CV module
- Translate from Japanese to English using browser
Controller is XAIO RP2040
- Programmed in CircuitPython
MIDI In
- Standard MIDI Jacks
- MIDI out jack fir future functionality
0-5V Analog CV outs
- MCP4822 12-bit D/A - SPI Interface
- MOD
- V/OCT
Digital Outs
- Gate
- Clock
Pot supports setting Clock rate
Standard EuroRack 6 pin header
- Supports 12V in with on-board 5V regulator
- 5V regulator can be not installed if 5V is available on EuroRack connection
Card is not a Eurorack card
- Probably too deep, needs cabling

elkayem midi2cv GitHub page _ Nano based project
- Arduino MIDI library has not yet been ported to Pico so will need to use Python
- Drives 4 CV outputs: Pitch Blend, Control, Note, Velocity
- This card only drives Note (Voltes/Oct, Mod)
MIDI Controller in Python
Principles of Voltage Control
Creative Control Strategies: MIDI to CV
EuroPi
Eurorack Beginners Guide
Eurorack Wiki page
PicoPicoSynth

@@ Line 27: / Line 27: @@
 * [https://github.com/elkayem/midi2cv elkayem midi2cv GitHub page] _ Nano based project
-** Arduino MIDI library has '''not' yet been ported to Pico so will need to use Python
+** Arduino MIDI library has '''not''' yet been ported to Pico so will need to use Python
 ** Drives 4 CV outputs: Pitch Blend, Control, Note, Velocity
 ** This card only drives Note (Voltes/Oct, Mod)